Abstract:The performance of legged robots depends strongly on both mechanical design and control, motivating co-design approaches that jointly optimize these parameters. However, most existing co-design studies focus on link dimensions and transmission ratios while neglecting detailed actuator design, particularly motor and gearbox parameter optimization, and are largely limited to serial open-chain mechanisms. In this work, we present a co-design framework for a planar closed-chain five-bar monoped that jointly optimizes mechanical design, motor and gearbox parameters, and control parameters for dynamic jumping. The objective is to maximize jump distance while minimizing mechanical energy consumption. The framework employs a two-stage optimization approach, where actuator optimization generates a mapping from gear ratio to actuator mass, efficiency, and peak torque, which is then incorporated into CMA-ES-based co-design optimization of the robot design and control parameters. Simulation results demonstrate an improvement of approximately 30.4% in jump distance and an 11.5% reduction in mechanical energy consumption compared to a nominal design, highlighting the effectiveness of the proposed framework for high-performance and energy-efficient planar jumping.
From: Aastha Mishra [view email]
[v1]
Tue, 7 Apr 2026 16:21:53 UTC (2,320 KB)
[v2]
Mon, 6 Jul 2026 14:49:08 UTC (1,106 KB)
此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。 原文来自 — 版权归原作者所有。