Abstract:Continuum robots offer a promising approach for minimally invasive and natural-orifice surgical procedures due to their inherent compliance and dexterity. However, this flexibility also makes estimating the current shape of the robot challenging. Several approaches have been used to reconstruct the shape of these robots, including imaging, optical sensing, magnetic sensing, and resistive sensing. Strain sensors fabricated using direct laser writing (DLW) could provide an alternative sensing method. This technique involves using a laser to induce carbonization of certain polymers to create graphene patterns, such as strain sensors. In this paper, we demonstrate how a flexible continuum joint and a DLW sensor can be machined as one monolithic structure using the same laser and the same setup. The fabricated sensors are characterized using linear and nonlinear models, which are used to predict the joint angle with error as low as 1.76 degrees. Furthermore, we demonstrate how a DLW sensor can be used to implement closed-loop control in a robotic joint, achieving tracking error under 3 degrees.
From: Amber Kay Rothe [view email]
[v1]
Wed, 17 Jun 2026 16:41:09 UTC (5,353 KB)
此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。 原文来自 — 版权归原作者所有。