





















This paper presents a system for hardware-in-the-loop (HiL) simulation of unmanned aerial vehicle (UAV) control algorithms implemented on a heterogeneous SoC FPGA computing platforms. The AirSim simulator running on a PC and an Arty Z7 development board with a Zynq SoC chip from AMD Xilinx were used. Communication was carried out via a serial USB link. An application for autonomous landing on a specially marked landing strip was selected as a case study. A landing site detection algorithm was implemented on the Zynq SoC platform. This allowed processing a 1280 x 720 @ 60 fps video stream in real time. Performed tests showed that the system works correctly and there are no delays that could negatively affect the stability of the control. The proposed concept is characterised by relative simplicity and low implementation cost. At the same time, it can be applied to test various types of high-level perception and control algorithms for UAV implemented on embedded platforms. We provide the code developed on GitHub, which includes both Python scripts running on the PC and C code running on Arty Z7.
此内容由惯性聚合(RSS阅读器)自动聚合整理,仅供阅读参考。 原文来自 — 版权归原作者所有。