Spiking Neural Networks (SNNs) can reduce energy consumption compared to conventional Artificial Neural Networks (ANNs) when spiking activity is sparse and the neuron model is hardware-friendly. However, biologically faithful models are often too costly to implement on FPGAs, whereas very simple models (e.g., IR/LIF) sacrifice part of the neuronal dynamics. In this work, we present an FPGA accelerator for an SNN using Spiking Recurrent Cell (SRC) neurons, providing a trade-off between biological plausibility and hardware cost. We propose a set of mathematical simplifications that remove costly unary operators (\textit{tanh}, \textit{exp}) and avoid floating-point arithmetic through scaling and piecewise-defined approximations. The complete network is implemented in VHDL and validated using spiking traces derived from the MNIST dataset. The weight matrices computed off-line are stored directly in LUT-registers without any adaptation. This demonstrates the robustness of SRC cells. Experiments were conducted on an Artix-7 XC7A200T clocked at 100 MHz. The reference implementation achieves 96.31\% accuracy with a 220-image spiking trace and a processing time of 1.7424 ms per digit. We then investigate accuracy/energy trade-offs by reducing the spiking trace length and quantizing synaptic weights down to 4 bits, achieving 93.32\% accuracy at 0.55 mJ per digit (55 images, 5-bit weights) and 92.89\% at 0.45 mJ (44 images, 4-bit weights). These results show that SRC-based SNNs can deliver competitive performance with reduced energy consumption, while preserving richer neuronal dynamics than standard LIF/IR models.