Abstract:Accurate identification of hydrodynamic derivatives is essential for precise control and autonomous navigation of Unmanned Surface Vehicles (USVs). However, acquiring high-fidelity manoeuvring data from physical sea trials is often constrained by cost, safety, and environmental disturbances. Standard manoeuvring trials, particularly Turning Circle (TC) and Zig-Zag (ZZ), remain fundamental to IMO and ITTC assessment procedures because they provide comparable performance metrics reflective of underlying hydrodynamic behaviour. This paper extends the open-source Marine Robotics Unity Simulator (MARUS) by introducing a standardised Virtual Sea Trial framework for automated execution and data generation of TC/ZZ manoeuvres. The framework provides traceable command-actuation logging, system-identification (SI)-focused data conditioning, and automated extraction of IMO/ITTC-aligned manoeuvring metrics. A key contribution is a dedicated TC/ZZ data acquisition and post-processing pipeline, improving the repeatability and auditability of simulator-based manoeuvres while producing SI-ready datasets for hydrodynamic-derivative identification and digital-twin workflows. The framework also provides explicit command-execution separation for differential-thrust steering, where manoeuvre inputs are recorded as ordered rudder-equivalent commands and realised actuation is logged as an execution-level proxy derived from applied thrust. Case study results demonstrate repeatable and IMO-compliant manoeuvre behaviour. For TC tests, the normalised advance differs by approximately 3.9% between port and starboard turns, while the tactical diameter differs by 4.6-4.7%. For ZZ tests, first and second overshoot excesses remain below 1 degree for both +/-10-degree and +/-20-degree manoeuvres, satisfying IMO criteria, while peak yaw rates range from approximately 4.1 to 5.8 degrees/second.
From: Paria Rezayan [view email]
[v1]
Wed, 10 Jun 2026 17:21:30 UTC (27,172 KB)
[v2]
Thu, 11 Jun 2026 18:28:08 UTC (13,342 KB)
此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。 原文来自 — 版权归原作者所有。