undo & redoNo need to explain. They work as their name suggest. Many Zsh users remain unaware of these two widgets since they are not bound in viins keymap (which is the default for most users). I bind them to [Ctrl+Z] & [Ctrl+Y], respectively.
magic-spaceIt behaves like normal space except that it can perform history expansion. That is to say, it turns !-1 to <last command> in your buffer. Usually bound to [Space].
push-linePush the current buffer onto the buffer stack and clear the buffer. Next time the editor starts up, the buffer will be popped off the top of the buffer stack and loaded into the editing buffer.
It allows you to leave halfway to execute one other command and then resume. Usually bound to [Ctrl+Q].
push-line-or-editAt the top-level (PS1) prompt, equivalent to push-line. At a secondary (PS2) prompt, move the entire current multiline construct into the editor buffer. The latter is equivalent to push-input followed by get-line.
A more powerful version of push-line. Usually bound to [Ctrl+Q].
If you want to learn more, there are a few good places to go:
# Ref: https://github.com/marlonrichert/zsh-edit
qc-word-widgets() {
if [[ $WIDGET == *-shellword ]] {
local words=(${(Z:n:)BUFFER}) lwords=(${(Z:n:)LBUFFER})
if [[ $WIDGET == *-backward-* ]] {
local tail=$lwords[-1]
local move=-${(N)LBUFFER%$tail*}
} else {
local head=${${words[$#lwords]#$lwords[-1]}:-$words[$#lwords+1]}
local move=+${(N)RBUFFER#*$head}
}
} else {
local subword='([[:WORD:]]##~*[^[:upper:]]*[[:upper:]]*~*[[:alnum:]]*[^[:alnum:]]*)'
local word="(${subword}|[^[:WORD:][:space:]]##|[[:space:]]##)"
if [[ $WIDGET == *-backward-* ]] {
local move=-${(N)LBUFFER%%${~word}(?|)}
} else {
local move=+${(N)RBUFFER##(?|)${~word}}
}
}
if [[ $WIDGET == *-kill-* ]] {
(( MARK = CURSOR + move ))
zle -f kill
zle .kill-region
} else {
(( CURSOR += move ))
}
}
for w in qc-{back,for}ward-{,kill-}{sub,shell}word; zle -N $w qc-word-widgets
bindkey '^[[1;5D' qc-backward-subword # [Ctrl+Left]
bindkey '^[[1;5C' qc-forward-subword # [Ctrl+Right]
bindkey '^[[1;3D' qc-backward-shellword # [Alt+Left]
bindkey '^[[1;3C' qc-forward-shellword # [Alt+Right]
bindkey '^H' qc-backward-kill-subword # [Ctrl+Backspace] (in Konsole)
bindkey '^W' qc-backward-kill-subword # [Ctrl+Backspace] (in VSCode)
bindkey '^[[3;5~' qc-forward-kill-subword # [Ctrl+Delete]
bindkey '^[^?' qc-backward-kill-shellword # [Alt+Backspace]
bindkey '^[[3;3~' qc-forward-kill-shellword # [Alt+Delete]
zsh-edit’s README explains the effect very well:
This is how built-in word widgets ({for,back}ward-word, {,backward-}-kill-word) move:
# Zsh with default WORDCHARS='*?_-.[]~=/&;!#$%^(){}<>' moves/deletes way too much:
# > > > > >
% ENV_VAR=value command --option-flag camelCaseWord ~/dir/*.ext
# < < < < <
# Zsh with WORDCHARS='' is bit better, but skips punctuation clusters & doesn't find subWords:
# > > > > > > > >
% ENV_VAR=value command --option-flag camelCaseWord ~/dir/*.ext
# < < < < < < < < <
This is how zsh-edit subword widgets move:
# Zsh Edit with WORDCHARS=''
# > > > > > > > > > > > > >
% ENV_VAR=value command --option-flag camelCaseWord ~/dir/?*.ext
# < < < < < < < < < < < < <
# Zsh Edit with WORDCHARS='~*?'
# > > > > >
% cd ~/dir/?*.ext
# < < < < <
This function also includes shell-word widgets to let you move with greater strides. They are more intuitive than Zsh’s select-word-style in some edge cases.
Update 2024-03-12: I find that Roman Perepelitsa has made an excellent plugin called zsh-no-ps2 for this purpose. It’s more thoughtful and rigorous than my widget.
# [Enter] Insert `\n` when accept-line would result in a parse error or PS2
# Ref: https://github.com/romkatv/zsh4humans/blob/v5/fn/z4h-accept-line
qc-accept-line() {
if [[ $(functions[_qc-test]=$BUFFER 2>&1) == '' ]] {
zle .accept-line
} else {
LBUFFER+=$'\n'
}
}
zle -N qc-accept-line
bindkey '^M' qc-accept-line
On occasion, we may unintentionally hit a key – like ' – before hitting enter. And that will result in a secondary prompt (PS2), which is poorly supported, and your first line will be recorded in history anyway.
In contrast, my widget gives you a newline instead in that scenario, so you can just delete back to correct your command. Moreover, my widget makes writing multi-line commands easier.
# Trim trailing whitespace from pasted text
# Ref: https://unix.stackexchange.com/questions/693118
qc-trim-paste() {
zle .bracketed-paste
LBUFFER=${LBUFFER%%[[:space:]]#}
}
zle -N bracketed-paste qc-trim-paste
Sometimes, we want to copy some command from the browser, say:
We triple-click it to select the whole line and then copy. However, triple-clicking also selects the newline character. This could be annoying when pasting to the terminal. Have a try!
Thankfully, we have bracketed-paste handling all pasted text. We can hook pasting by overwriting this widget. The same trick is used by bracketed-paste-magic and bracketed-paste-url-magic.
# Change `...` to `../..`
# Ref: https://grml.org/zsh/zsh-lovers.html#_completion
qc-rationalize-dot() {
if [[ $LBUFFER == *.. ]] {
LBUFFER+='/..'
} else {
LBUFFER+='.'
}
}
zle -N qc-rationalize-dot
bindkey '.' qc-rationalize-dot
bindkey '^[.' self-insert-unmeta # [Alt+.] insert dot
It’s a better alternative to traditional .../..../..... aliases. It’s more readable and supports unlimited levels.
# [Ctrl+L] Clear screen but keep scrollback
# Ref: https://superuser.com/questions/1389834
qc-clear-screen() {
local prompt_height=$(echo -n ${(%%)PS1} | wc -l)
local lines=$((LINES - prompt_height))
printf "$terminfo[cud1]%.0s" {1..$lines} # cursor down
printf "$terminfo[cuu1]%.0s" {1..$lines} # cursor up
zle .reset-prompt
}
zle -N qc-clear-screen
bindkey '^L' qc-clear-screen
Zsh has a built-in clear-screen widget bound to [Ctrl+L] by default. But it also erases your terminal emulator’s whole history in addition to the screen. My widget can keep the scrollback.
And it’s more flexible. You can customize prompt position by adjusting the number of lines. For example, local lines=$((LINES/2)) moves the prompt to the middle.
# [Esc Esc] Correct previous command
# Ref: https://github.com/ohmyzsh/ohmyzsh/blob/master/plugins/thefuck
qc-fuck() {
local fuck=$(THEFUCK_REQUIRE_CONFIRMATION=false thefuck $(fc -ln -1) 2>/dev/null)
if [[ $fuck != '' ]] {
compadd -Q $fuck
} else {
compadd -x '%F{red}-- no fucks given --%f'
}
}
zle -C qc-fuck complete-word qc-fuck
bindkey '\e\e' qc-fuck
It’s a powerful replacement of oh-my-zsh’s sudo plugin. It calls thefuck to correct previous command. There are many cases that sudo plugin cannot handle, for example:
echo 1 > /sys/devices/system/cpu/cpufreq/boost
You can’t simply prefix it with sudo as echo is not a program but a shell built-in command. Now, thefuck to the rescue. It can smartly prompt sudo sh -c "echo 1 > /sys/devices/system/cpu/cpufreq/boost".
It’s better than using fuck as well. Because you can edit the command before executing it.
Here are some key-bindings that aren’t up my street but are still useful.
fzf is a fuzzy finder. It can be integrated to many commands to provide a handy selection menu. fzf offers some completions and key-bindings under the shell folder. For Zsh, that includes:
[Ctrl+T] - Paste the selected file path(s) into the command line[Alt+C] - cd into the selected directory[Ctrl+R] - Paste the selected command from history into the command lineI also recommend you to take a look at fzf-tab, a fabulous completion plugin.
xplr is a TUI file explorer. Its document offers a bunch of hacks. I used to enjoy this key-binding:
# [Ctrl+N] Navigate by xplr
# This is not a widget since properly resetting prompt is hard
# See https://github.com/romkatv/powerlevel10k/issues/72
bindkey -s '^N' '^Q cd -- $(xplr --print-pwd-as-result) \n'
I’ve spent enough time on this blog. There are more awesome projects but I’m too lazy to introduce all of them. Some are listed below.
此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。 原文来自 — 版权归原作者所有。