This table saw really has it all. The assembly from box to saw-mounted stand took less than 20 minutes. Moving away from the conventional “kickstand” configuration, the DeWalt saw employs four folding legs that conveniently engage with the squeeze of a lever. This gives the saw a base of unparalleled sturdiness.

Every accessory has a proper home onboard the saw itself, and DeWalt’s inclusion of a table side release lever makes swapping riving knives and blade guards an absolute breeze. The fence—maxing out at 32-1/2 inches—was dead-on accurate from the jump. Tracking was consistent straight through the cut.

I’m a fan of the push stick mounted inside the fence itself for easy access when making cuts close to the blade. Rip cuts (both straight and beveled) were clean and accurate, but dust control is merely average. My other complaints with this saw are that the bevel and blade height gearing feel a bit stiff, and I’d love to see a bed extender option beyond the blade for handling longer materials better.

Key Specs

This Skil saw makes a strong case for stretching your dollar where it counts—as long as you don’t mind carrying the saw from place to place. This saw lacks wheels, but has four legs that fold out from under it, card-table style. For less than $350, you get a full 10-inch saw with the stability–if not the mobility—of a jobsite saw.

The legs are simple and effective—they lock in solid when you set them up and tuck away without turning the whole unit into a bulky mess. It’s a smart design that makes it easy to store or throw in the truck without thinking twice about it.

Looking beyond the stability design, this saw really shines where table saws should—in its cutting ability. The fence was dead-on accurate to the blade straight out of the box, a factor that assists the powerful Skil motor in delivering repeat cuts effectively. I was especially taken with the blade quality, which routinely ripped through 1x trim like a razor, leaving barely a mark to sand away later. Dust exhaust was equally impressive as I watched a steady flow of debris cascade from the rear port. Where other saws tend to accumulate dust in the body of the saw, I saw none of that here.

For a saw that cuts this well and stands on its own stable platform, this one is a huge win at this price and likely ideal for those looking to expand their tool corral without going over budget.

Key Specs

Like most jobsite table saws, this one comes with a 10-inch blade and a legitimate 32-1/2-inch rip capacity, which is more than you’ll need for most light-duty cutting work and much more than I expected considering this saw’s price.

What surprised me most, though, is the saw’s stand. It has folding legs and 6-inch wheels, so you can simply roll it from the garage to wherever you’re working. When you’re done, it tucks up nicely without taking over your entire storage space.

Assembling the Kobalt saw was a little more complicated than others—it took me a solid 45 minutes to build. Once built, you notice how much lighter it is than bigger jobsite saws. It’s not quite as planted as the heavier DeWalt or Bosch models, but it is lighter on your wallet. For occasional use, this saw gets you in the game without burning a serious hole in your wallet.

Key Specs

Bosch really nailed the balance with this saw. It rides on a gravity-rise stand, and it’s clearly built for those who need to move their saw around but still expect it to perform like a burly stationary beast.

The stand’s open-frame design acts as its own base when folded and stood upright, which makes storage a whole lot easier. Add in the solid rubber wheels, and it’s as nimble as a hunting dog. While the assembly wasn’t my favorite part of this experience—the moving parts of the gravity rise system relies on precise alignment—the saw was up and making cuts in less than 45 minutes, which is pretty fair. That said, the system is well worth the assembly patience. Just hit the foot pedal, and the entire unit lifts smoothly into working position.

Once you’re cutting, there’s very little compromise on this tool. You get a full 32-1/8-inch rip capacity, and the motor regulates blade speed so it doesn’t struggle as much when you have to lean into it. But what I really like is the automatic blade brake, which kicks in about 3 seconds after you cut the power. If you’re doing a bunch of repeat cuts, the difference between those 3 seconds and the time it normally takes for a blade to spin down adds up quickly.

Key Specs

Of all the table saws I tested, this was by far the easiest to set up straight from the box. Like the DeWalt, the legs tuck away and spring out via individual ball-joint buttons embedded in the chassis. Onboard storage for everything is excellent, and the rip fence was accurate when I showed the desired ruler line against the red indicator as opposed to covering it. On that note, this saw has the largest table in our product field, and the fence extends to a full 35-inches to the right of the blade. Add to that the built-in bed extender to the rear of the table and this becomes an ideal saw for ripping large sheet materials.

The saw has a nice, steady power, tracking through 5/8-inch plywood and dimensional lumber with little effort. It handled crosscuts equally well in both materials. I did struggle with pressure-treated 4x4s, as the motor bogged a bit and I had to really push. Dust collection, meanwhile, was excellent. There was minimal throwback of sawdust over the blade and toward me.

The Metabo is a quieter saw in operation, and the bevel and blade height gearing are both very fluid. The fence lock pushes down to release it, which is atypical, so it might take a bit of getting used to. Some online reviews complain of the potential of the fence drifting out of alignment with the blade over time, but I saw no evidence of that.

Key Specs

Of all the saws I set up straight from the box, this one gave me the most trouble. I attribute much of that to the rather poor schematics in the instructions, so I highly recommend this YouTube video, which helps with the visuals. Once assembled, this saw is a beast in both size and power. Even the wheels are huge (16 inches), which is something you have to account for when you return the saw to its storage position. That added circumference increases the speed of the drop. Be warned—it drops down fast!

The shining feature of this saw is Skil’s patented worm-drive motor, which is self-cooling and powerful enough to rip through pressure-treated 4x4s without a hitch (the only saw on our list to clear that depth in a single pass). While the motor spins faster than other saws at 5,000 RPM, the gearing converts that speed to higher torque and lower blade speed under load, which makes cuts through heavy, damp lumber easier.

The fence—in spite of a less-than-sturdy release latch—glides across the rack-and-pinion gearing with ease, extending out to 30-1/2 inches, which is fine for larger sheet materials. The saw has a powerful, fast start-up and a quick braking system, and the table ruler is right on the money in terms of accuracy.

Key Specs

We were introduced to the Evolution R10TBLX via the comments section of one of our social media posts of the previous version of this buying guide. It seemed like fans of this saw were adamant that we were overlooking a real contender by not including this saw. So, we listened and called it in for testing.

While the rolling buck is not as sturdy as those on other saws I’ve tested, it rolls well across terrain and locks in horizontally at the push of the pedal. Once in place, this table saw is a workhorse like I’ve rarely used before.

First, the saw is capable of cutting a variety of materials including wood, plastic, laminates, and steel. Yes, you read that right—steel. And that’s all without changing the 28-tooth tungsten carbide blade that’s included. The saw also boasts dual rack-and-pinion tracking (to better maintain fence-to-blade alignment), table extenders, leveling feet, and dado-cutting capabilities. But the truly unique element of this saw is the built-in crosscut sled, which offers an added element of safety when making those risky cuts.

The Evolution is a great choice for someone who routinely bridges materials in their work. Don’t expect furniture-quality cuts from the general-use blade—especially over time if you’re running through a lot of metal (or lumber with nails embedded)—but this unique saw certainly earns its spot on our list.

Key Specs

At just 45 pounds, this saw makes other portable models seem stationary. The frame doubles as a carrying handle, so it feels more like grabbing a piece of gear than wrestling with a tool. And unlike a lot of cordless table saws, this one actually comes with a 12.0Ah battery (though if you’re already on the Milwaukee M18 platform, you can buy this tool-only and save about $350.)

Light as it is, this saw is surprisingly solid. I set mine up on an old picnic table, and it didn’t budge while I cut with it, even while running plywood and 1x hardwood through it all day. Best of all, it delivers very clean, accurate cuts repeatedly.

Of course, considering its compact size, you do give up a bit of capacity with this saw. The 8-1/4-inch blade means less cut depth than you get with a full 10-inch saw, and the 24-1/2-inch rip capacity isn’t huge, generally around six to ten inches less than larger jobsite saws.

But that’s not really what this kind of saw is meant for. This one is about mobility and convenience—grabbing it, setting it up anywhere, and getting to work without dragging a cord around behind you.

Key Specs