After months of work, Glimmer is landing in Canary today.

What this means:

• The test suite passes.
• We have tested Glimmer on our own apps, and, for the most part, apps boot and run correctly.
• There are still known issues (see below), including with the test helpers.
• At this point, we need community help to identify compatibility issues not covered by the test suite.
• We expect to continue improving compatibility with the pre-Glimmer engine for some time, as new issues come to light.

Glimmer is the new rendering engine the Ember community has been working on for the past several months. It is the first ground-up change to the templating engine since SproutCore 2.0, and takes advantage of the groundwork laid by HTMLBars to dramatically improve re-rendering performance. It also sets the stage for more performance improvements during the 2.x series, and React-inspired improvements to the Ember programming model. Best of all, we are landing Glimmer in Ember 1.13, compatible with the full public API of Ember 1.x.

It's also worth noting that while our apps feel faster, not every performance benchmark will necessarily show marked improvement. There will be more on this below, but the Glimmer refactor focused primarily on dramatic improvements to re-rendering performance and programming model improvements.

Initial render of component-heavy pages shows some improvement in most of our tests, but you should expect to see the biggest improvements when re-rendering lists, especially when you are not using deprecated functionality.

Once we land Glimmer, you will probably see a variety of different benchmarks testing various aspects of Ember. We expect to see benchmarks showing that there are still pathologically slow scenarios in Ember, especially in areas that we did not focus on improving. We expect to continue to improve performance across Ember throughout the 2.x series, and discuss that more below.

Also note that while we took great pains to support features present in Ember 1.12 (including many long-deprecated features), that compatibility often comes with significant performance costs. In some cases, seemingly similar constructs (e.g. {{#each posts as |post|]} vs. {{#each posts itemController='post' as |post|}}) have significantly different internal implementation, and the Ember 2.0 version has vastly better performance.

Finally, there will be an upcoming guide in the next week or so that describes the new features of the Glimmer engine (attrs, new lifecycle hooks, keys in #each), but at the moment we are focusing on compatibility with 1.x and testing the 1.x API with existing applications.

Please follow these instructions to test Ember-CLI apps with Canary:

• http://www.ember-cli.com/#using-canary-build-instead-of-release

Known Issues

There are several known issues that you should consider when evaluating Glimmer:

• There are still a few memory leaks that we have identified and are quickly addressing.
• The concept of controller in templates and actions in Ember 1.x was fairly nuanced. Glimmer started with a simpler model and layered compatibility on top. There are known gaps in the compatibility layer that we are still addressing.
• There are still a number of issues in the testing helpers (especially the faux unit tests that use "isolated containers") that are causing apps that work correctly to fail tests. We are working to fix the test helpers, and should have that work done before we release 1.13 beta.
• There are likely a number of not-yet-known compatibility issues in Glimmer. You should assume that the vast majority of issues you encounter when testing Glimmer over the next few weeks will be addressed before the final release.
• The compatibility layer is quite slow in some areas, making the overall Glimmer engine slower than we would like. We have plans to improve overall performance through the canary and beta cycle, and then in the 2.0 release cycle.
• In general, the Glimmer effort was an attempt to improve re-rendering performance, especially in large lists. It also laid the groundwork for significant performance work in initial render and throughout the framework, but that work is not yet done. Expect to see continued performance improvements in Ember throughout the 2.x cycle as a result of this change.

The most critical of these caveats should be addressed before we release 1.13 beta, and we expect to continue work on the remaining issues throughout the 1.13 beta cycle.

Because of the magnitude of this change, and the proximity to the Ember 2.0 "cruft removal" pass, we plan to aggressively fix reported bugs during the 1.13 beta period. There will be another post describing our 1.13 and 2.0 release plans with more precision in the next few weeks.

Performance Gains

The biggest performance gains in Glimmer come from moving to a simpler rendering model, built on top of HTMLBars.

First, this allowed us to remove all internal views for constructs like {{foo}}, {{#if bar}} and even in {{#each posts as |post|}}. This view removal has an impact on initial render, because these constructs are very common in real-world templates.

Second, as we have discussed extensively, this allows us to significantly improve the performance of re-rendering, which makes it practical to re-render lists with entirely new arrays with very good performance. Previously, achieving reasonable performance was very difficult, and even when possible, came with significant bookkeeping overhead.

Interestingly, we have found that when testing real apps, the performance gains are much more widespread than we expected, in large part because of the simplification of the overall model.

Glimmer's performance in real applications has pleasantly surprised us, exceeding the improvements we've seen in benchmarks designed to stress-test pathological cases.

When upgrading to Glimmer, please pay attention to the real-world performance of your application in production mode and after clearing any deprecations with performance warnings.

Deprecated Features

Throughout the 1.x series, Ember has deprecated features we intended to remove in 2.0. That process has continued with Ember 1.13, which will contain Glimmer.

However, it's worth noting that Glimmer is the first major change to many parts of the view layer since SproutCore 2! As a result, perfect compatibility, especially in private APIs, was more challenging.

During the process of building Glimmer, we found various semantics of "controller"s to be the most challenging. For the most part, this is because the concept of controller has a number of different meanings depending on context (routes, {{render}}, {{#each posts itemController='post'}}, {{#each posts itemController='post' as |post|}}, {{#with someController}}, etc.).

Controllers and components both manage a template's "context" (called "self" in Glimmer) and serve as a target for actions. Mirroring these semantics, which are effectively derived from implementation details of Ember 1.x's rendering engine, has been a challenge. We're confident they are very close, but encourage you to open an issue if they have changed.

Glimmer, through HTMLBars, has a much clearer concept of "scope", and features like {{yield}} work directly with that scope object. We were able to get the Ember test suite passing by implementing the old semantics on top of the new scope concept, but we are aware that we have gaps in our implementation.

Please let us know if you find controller semantics that we have implemented incorrectly. Bug reports would help, JSBins would help more, and pull requests with failing tests would help even more.

Finally, for the best experience with Glimmer, you should try to move your application away from itemController, {{render}} and other constructs that manipulate the controller from the template. We know that this is not always possible (our applications all still make use of some cases of these features), which is why we worked so hard on compatibility.

That said, you'll get better performance and a quicker upgrade path to 2.0 if you work on eliminating uses of these features soon. Implementing them correctly added enough complexity that we will want to move somewhat aggressively in 2.x to enable us to further improve performance.