Introduction
While studying for CompTIA network+, I couldn't grasp the relationships between Transceiver and Fiber cable.
I could memorize 10GBase-SR uses MMF, but I didn't understand what is that.
Once I understood the structure, everything cleared up. So I decided to write it down.
Why optical fiber is needed
In my last post, I introduced LAN cables (copper cables), which have a limited range.
LAN cable → Max 100m
Optical fiber → A few kilometers to tens of kilometers
In an office use, it is enough to use LAN cable.
However, optical fiber is necessary for connections inside data centers or between remote locations over long distances.
What is Transceiver
Switches and routers handle electrical signals internally.
On the other hand, Optical fiber connects with optical signal.
Electrical signal → Transceiver → Optical signal → Fiber Cable → Transceiver → Electrical
A Transceiver is a small module that plugs into a dedicated port called an SFP slot, found on switches and routers.
Switch
┌────────────────────────────────────┐
│ Port1 Port2 Port3 [SFP slot] │
└────────────────────────────────────┘
↑
Transceiver's port
3 parts for connection
There are 3 essential parts involved in this type of connection.
1. Transceiver （Exchange module）
This is inserted to Switch's SFP slot
This plays a role for conversion between electric and light
2. Fiber Cable （Optical fiber cable）
This is a cable itself to connect between Transceivers
There are two kinds of MMF or SMF
3. Switch or Router
These devices have a dedicated port for Transceiver
It is important to know that a single Transceiver alone is not enough- you need one at each end.
Switch A Switch B
┌────────────┐ ┌────────────┐
│ [SFP slot] │ │ [SFP slot] │
│ Transceiver├─────── Fiber Cable ───────┤Transceiver │
└────────────┘ └────────────┘
↑ ↑
Electrical signal → Optical signal Optical signal → Electrical signal
Understanding by familiar analogy
Transceiver is like HDMI conversion adapter for smartphone.
Smartphone （USB-C）
↓
Conversion adapter （USB-C → HDMI）← Transceiver
↓
HDMI cable ← Fiber Cable
↓
Conversion adapter （HDMI → other terminal）← another Transceiver
↓
TV
Just as a smartphone can only handle USB-C natively, it can connect to an HDMI cable through an adapter. In the same way, a switch can connect to optical fiber through a Transceiver.
Fiber cable type
There are two types of optic fiber cables; MMF and SMF.
MMF (Multi-Mode Fiber)
Inside this cable, light proceeds with reflecting many times.
Images of cross section of the cable
↗ ↘ ↗ ↘
→ →（Proceed with reflection）
↘ ↗ ↘ ↗
The more reflections occur, the more the signal degrades.
Features
・Thick core（50〜62.5μm）
・For short distance（〜about 300m）
・Cheap
・Use in data center
SMF (Single-Mode Fiber)
Inside this cable, light travels in a single straight path without reflection.
Images of cross section of the cable
→→→→→→→→→→→→（Proceed straightly）
This type of the cable is more stable, which makes it possible to use for long distance.
Features
・Thin core（9μm）
・For long distance（〜10km以上）
・Expensive
・Use between bases
What is 10GBase-SR and 10GBase-LR
Transceiver has two kinds of SR and LR.
Understanding the naming structure eliminates the need for memorization.
10G Base SR
│ │ │
│ │ └ S = Short （Short distance）/ L = Long （Long distance）
│ │ R = Fiber （Optic fiber）
│ └ Baseband transmission
└ 10Gbps（Communication speed）
| Standard | Transceiver | Fiber Cable | Distance |
|---|---|---|---|
| 10GBase-SR | SR compatible module | MMF | 〜300m |
| 10GBase-LR | LR compatible module | SMF | 〜10km |
The concept of how to use them differently
It is essential to understand that Transceiver and Fiber Cable must always be selected as a matching set.
✓ SR compatible Transceiver + MMF → correct
✗ SR compatible Transceiver + SMF → no function
Decision making orders↓
1. Decide distance
→ short distance （inside data center） or long distance （between bases）
2. Select Transceiver
→ short distance = SR / long distance = LR
3. Match Fiber Cable
→ SR = MMF / LR = SMF
Big picture
【short distance: e.g. inside data center】
Switch A
└ SFP slot
└ Transceiver（10GBase-SR）
└ MMF（〜300m）
└ Transceiver（10GBase-SR）
└ SFP slot
└ Switch B
【long distance ：e.g. between bases】
Switch in Tokyo office
└ SFP slot
└ Transceiver（10GBase-LR）
└ SMF（〜10km）
└ Transceiver（10GBase-LR）
└ SFP slot
└ Switch in Osaka office
Conclusion
I used to struggle with memorizing these concepts because I lacked a deep understanding of the structure. Transceiver and Fiber Cable are completely separate components. Once you understand that the choice is driven by distance requirements, everything falls into place.