spice the journey of an unitiated pleb.

Proxmox Support Forum

[SOLVED] - Github Auth for Mirrors-Kernel Repo? [Automation] Mass migration tool for MS Win11/Server Proxmox GUI hang - not response is it possible to reject or quarantine spam based on conditions I set ? The PVENode task list in PVE9 is partially obscured due to the terminal font being too large. About 100% error reporting due to pveproxy.service hooks Kubernetes overlay networking breaks when upgrading from PVE 9.1 to PVE 9.2.3 Zentraler Speicher No space left on device Combine datastore and direct file archival to tape Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird. How to migrate disk of a VM from one ZFS to another Windows Server 2025 fails to boot after PVE 9.2 / Linux 7.0 Kernel upgrade Cannot Install Proxmox on T610 Poweredge with H700 PERC card sdn Config. gateway not reachable How to safely change domain/FQDN? Welche Filterquote erreicht ihr? NFS Share status unknown on 2 of 5 nodes Can't connect to PVE9 consoles [solved] Can't connect to PVE9 consoles [solved] [SOLVED] - Use secondary network for PVE commands Created cluster, one node storage gone BUG: proxmox mail gateway FROM = null bypass spam filtering Moving existing PBS from VMWare workstation to PVE cluster Does eBGP SDN fabric support external peering? Bug: PDM 1.1 not recognizing valid license status Proxmox GUI hang - not response PVE crashes unexpectedly Proxmox Backup Server 4.2 released! Advice ceph-osd crashes with kernel 6.17.2-1-pve on Dell system [META] Links on Proxmox Forum Website Hardwarer oder Software RAID Joining a cluster with already created guests VM PDM missing backup jobs from PVE / Log retention Remove VM.Monitor from all users/roles, PVE 9.2 Proxmox Freezing (new instalation) 9.2.2 - Intel 12700T No Web gui and random connection reset by peer [SOLVED] - i40e module for X710 Intel NIC Dutch Proxmox Day 2026 How pools use the space Corosync initiiert Reboot trotz Verfügbarkeit der Systeme Opt-in Linux 7.0 Kernel for Proxmox VE 9 available After PVE 8to9 upgrade, unable to check guest fs freeze status Problem with MegaRAID SAS3508 controller proxmox-kernel-7.0.2-6-pve failing network service Auto sync guest time after rollback of VM snapshot with RAM/state Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host QEMU 11.0 available on pve-test and pve-no-subscription as of now 350 MPM Solventless Lamination Machine for High-Speed Flexible Packaging Making sense of NVMe zfs and SMART errors [SOLVED] - PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve [SOLVED] - Remove or reset cluster configuration. Proxmox 8.4.1 Fresh Install BCM57416 10G Ethernet Adapter Not Recognized PDM 1.1.1 unable to add AD realm with anonymous search [TUTORIAL] - Developer Workstation (Proxmox-VE 9) with cinnamon (LMDE7) SDN zone shows "pending" on peer nodes after node reboot (9.2.x) Cluster not quorate - extending auth key lifetime! Proxmox not rebooting properly (SOLVED) Proxmox 9 Stuck on loading initial ramdisk With new HA-Disarm Feature is there a Documentation for NUT Setup on Clusters? Proxmox 8.3 Installation Issue on ProLiant DL380 Gen9 Cluster networking setup LXC System images unavailable [SOLVED] - Fix: NVIDIA Drivers Failing after upgrade to Proxmox 9.2.2 (Kernel 7.0.2-6-pve) / NovaCore Conflict Install NUT directly on Proxmox VE and control guests from here driver usb for windows 7 System startup error and no network: Failed to start ifupdown2-pre.service - Helper to synchronize boot up for ifupdown. PBS backup space grow up constantly Proxmox Datacenter Manager 1.1 released! IPv4 not available in newly created VM Recommended Setup for Offsite Proxmox Backups? Hetzner Storage Box & Remote PBS Challenges duplicate, please delete this passthrought an USB device "by ID" to CT PDM Installer Freezes at 66% Tried PDM for the first time (version 1.1) - had issues PDM 1.1 automated install Suche Server-Provider für Proxmox connecting sdn to edge firewall SDN, IPAM & DHCP Migrating from read-only file system Ubuntu 26.04 installation fails for unknown reason Status Unbekannt nach Cluster Join Installing Proxmox Backup Server on Mac Mini (Late 2012) kernel 7.0 performance issue with zfs pools PVE becomes unreachable via ethernet but OS is running [SOLVED] - New 9.2 install - can't find 7.0.2-6-pve , not all the time [SOLVED] - Backup and dedupe a VM with LUKS Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs? I need help for setting up backup solution Way more NAGware, very little functionality, bugs galore Root squashing virtiofsd with --uid-map Intel ixgbe Driver Update Fail Passkey Login (not 2FA) Roblox VM detection - can be overcome? [TUTORIAL] - ZFS-Autosnaptshot inkl. Rollback und Daten direkt recovern (Windows/Linux) How to stop PVE Kernel upgrade [SOLVED] - very long waiting to log in to lxc debian 11 ssh [TUTORIAL] - Configuring Fusion-Io (SanDisk) ioDrive, ioDrive2, ioScale and ioScale2 cards with Proxmox Increase maximum USB devices in vm.conf

invalid@exam · 2026-06-25 · via Proxmox Support Forum

inxi -Fxs
System:
  Host: pve Kernel: 7.0.6-2-pve arch: x86_64 bits: 64 compiler: gcc v: 14.2.0
  Console: pty pts/1 Distro: Debian GNU/Linux 13 (trixie)
Machine:
  Type: Desktop System: Dell product: Precision Tower 7910 v: N/A serial: 26M9GK2
  Mobo: Dell model: 0NK5PH v: A00 serial: /26M9GK2/CNFCW0075200AF/ UEFI: Dell
    v: A34 date: 10/19/2020
CPU:
  Info: 2x 10-core model: Intel Xeon E5-2640 v4 bits: 64 type: MT MCP SMP
    arch: Broadwell rev: 1 cache: L1: 2x 640 KiB (1.2 MiB) L2: 2x 2.5 MiB (5 MiB)
    L3: 2x 25 MiB (50 MiB)
  Speed (MHz): avg: 3400 min/max: 1200/3400 cores: 1: 3400 2: 3400 3: 3400 4: 3400
    5: 3400 6: 3400 7: 3400 8: 3400 9: 3400 10: 3400 11: 3400 12: 3400 13: 3400
    14: 3400 15: 3400 16: 3400 17: 3400 18: 3400 19: 3400 20: 3400 21: 3400 22: 3400
    23: 3400 24: 3400 25: 3400 26: 3400 27: 3400 28: 3400 29: 3400 30: 3400 31: 3400
    32: 3400 33: 3400 34: 3400 35: 3400 36: 3400 37: 3400 38: 3400 39: 3400 40: 3400
    bogomips: 191560
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: NVIDIA GM204GL [Quadro M4000] driver: nouveau v: kernel arch: Maxwell
    bus-ID: 03:00.0 temp: 58.0 C
  Display: unspecified server: N/A driver: gpu: nouveau tty: 86x20
    resolution: 1920x1080
  API: EGL v: 1.5 drivers: nouveau,swrast platforms:
    active: gbm,surfaceless,device inactive: wayland,x11
  API: OpenGL v: 4.5 compat-v: 4.3 vendor: mesa v: 25.0.7-2
    note: console (EGL sourced) renderer: NV124, llvmpipe (LLVM 19.1.7 256 bits)
  Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr
Audio:
  Device-1: Intel C610/X99 series HD Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1b.0
  Device-2: NVIDIA GM204 High Definition Audio driver: snd_hda_intel v: kernel
    bus-ID: 03:00.1
  API: ALSA v: k7.0.6-2-pve status: kernel-api
Network:
  Device-1: Intel Ethernet I217-LM vendor: Dell driver: e1000e v: kernel port: 9020
    bus-ID: 00:19.0
  IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: 50:9a:4c:4e:93:9d
  Device-2: Intel I210 Gigabit Network vendor: Dell driver: igb v: kernel
    port: 6000 bus-ID: 09:00.0
  IF: enp9s0 state: down mac: 50:9a:4c:4e:93:b5
  IF-ID-1: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A
  IF-ID-2: fwbr108i0 state: up speed: 10000 Mbps duplex: unknown
    mac: e2:ba:fc:5e:ac:df
  IF-ID-3: fwln108i0 state: up speed: 10000 Mbps duplex: full
    mac: e2:ba:fc:5e:ac:df
  IF-ID-4: fwpr108p0 state: up speed: 10000 Mbps duplex: full
    mac: c6:e5:9d:4d:ca:ff
  IF-ID-5: tap108i0 state: unknown speed: 10000 Mbps duplex: full
    mac: 5a:e8:02:59:e1:36
  IF-ID-6: veth105i0 state: up speed: 10000 Mbps duplex: full
    mac: fe:a3:e0:ef:06:f8
  IF-ID-7: veth106i0 state: up speed: 10000 Mbps duplex: full
    mac: fe:60:69:58:ac:1a
  IF-ID-8: veth107i0 state: up speed: 10000 Mbps duplex: full
    mac: fe:cc:9d:d8:d0:4e
  IF-ID-9: vmbr0 state: up speed: 10000 Mbps duplex: unknown
    mac: 50:9a:4c:4e:93:9d
RAID:
  Device-1: BigData type: zfs status: ONLINE level: mirror-0 raw: size: 1.81 TiB
    free: 1.75 TiB zfs-fs: size: 1.76 TiB free: 1.55 TiB
  Components: Online: 1: sdc 2: sdd
Drives:
  Local Storage: total: raw: 7.28 TiB usable: 5.4 TiB lvm-free: 16.38 GiB
    used: 21.77 GiB (0.4%)
  ID-1: /dev/sda vendor: Western Digital model: WD2003FYYS-18W0B0 size: 1.82 TiB
  ID-2: /dev/sdb vendor: Western Digital model: WD2003FYYS-18W0B0 size: 1.82 TiB
  ID-3: /dev/sdc vendor: Toshiba model: DT01ACA200 size: 1.82 TiB
  ID-4: /dev/sdd vendor: Hitachi model: HUA722020ALA331 size: 1.82 TiB
Partition:
  ID-1: / size: 93.93 GiB used: 12.38 GiB (13.2%) fs: ext4 dev: /dev/dm-1
    mapped: pve-root
  ID-2: /boot/efi size: 511 MiB used: 352 KiB (0.1%) fs: vfat dev: /dev/sda2
Swap:
  ID-1: swap-1 type: partition size: 45 GiB used: 12 KiB (0.0%) dev: /dev/dm-0
    mapped: pve-swap
Sensors:
  System Temperatures: cpu: 46.0 C mobo: N/A sodimm: 38.0 C gpu: nouveau
    temp: 58.0 C
  Fan Speeds (rpm): cpu: 1008 gpu: nouveau fan: 3384
Info:
  Memory: total: 64 GiB available: 62.79 GiB used: 21.05 GiB (33.5%)
  Processes: 789 Uptime: 10d 15h 48m Init: systemd
  Packages: 1220 Compilers: gcc: 14.2.0 Shell: Bash v: 5.2.37 inxi: 3.3.38
root@pve:~# inxi -Fx
System:
  Host: pve Kernel: 7.0.6-2-pve arch: x86_64 bits: 64 compiler: gcc v: 14.2.0
  Console: pty pts/1 Distro: Debian GNU/Linux 13 (trixie)
Machine:
  Type: Desktop System: Dell product: Precision Tower 7910 v: N/A serial: 26M9GK2
  Mobo: Dell model: 0NK5PH v: A00 serial: /26M9GK2/CNFCW0075200AF/ UEFI: Dell
    v: A34 date: 10/19/2020
CPU:
  Info: 2x 10-core model: Intel Xeon E5-2640 v4 bits: 64 type: MT MCP SMP
    arch: Broadwell rev: 1 cache: L1: 2x 640 KiB (1.2 MiB) L2: 2x 2.5 MiB (5 MiB)
    L3: 2x 25 MiB (50 MiB)
  Speed (MHz): avg: 2453 high: 3400 min/max: 1200/3400 cores: 1: 3400 2: 3400
    3: 3400 4: 3400 5: 3400 6: 3400 7: 3400 8: 3400 9: 3400 10: 3400 11: 1507 12: 1507
    13: 1507 14: 1507 15: 1507 16: 1507 17: 1507 18: 1507 19: 1507 20: 1507 21: 3400
    22: 3400 23: 3400 24: 3400 25: 3400 26: 3400 27: 3400 28: 3400 29: 3400 30: 3400
    31: 1507 32: 1507 33: 1507 34: 1507 35: 1507 36: 1507 37: 1507 38: 1507 39: 1507
    40: 1507 bogomips: 191560
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: NVIDIA GM204GL [Quadro M4000] driver: nouveau v: kernel arch: Maxwell
    bus-ID: 03:00.0 temp: 58.0 C
  Display: unspecified server: N/A driver: gpu: nouveau tty: 86x20
    resolution: 1920x1080
  API: EGL v: 1.5 drivers: nouveau,swrast platforms:
    active: gbm,surfaceless,device inactive: wayland,x11
  API: OpenGL v: 4.5 compat-v: 4.3 vendor: mesa v: 25.0.7-2
    note: console (EGL sourced) renderer: NV124, llvmpipe (LLVM 19.1.7 256 bits)
  Info: Tools: api: eglinfo,glxinfo x11: xdriinfo, xdpyinfo, xprop, xrandr
Audio:
  Device-1: Intel C610/X99 series HD Audio vendor: Dell driver: snd_hda_intel
    v: kernel bus-ID: 00:1b.0
  Device-2: NVIDIA GM204 High Definition Audio driver: snd_hda_intel v: kernel
    bus-ID: 03:00.1
  API: ALSA v: k7.0.6-2-pve status: kernel-api
Network:
  Device-1: Intel Ethernet I217-LM vendor: Dell driver: e1000e v: kernel port: 9020
    bus-ID: 00:19.0
  IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: 50:9a:4c:4e:93:9d
  Device-2: Intel I210 Gigabit Network vendor: Dell driver: igb v: kernel
    port: 6000 bus-ID: 09:00.0
  IF: enp9s0 state: down mac: 50:9a:4c:4e:93:b5
  IF-ID-1: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A
  IF-ID-2: fwbr108i0 state: up speed: 10000 Mbps duplex: unknown
    mac: e2:ba:fc:5e:ac:df
  IF-ID-3: fwln108i0 state: up speed: 10000 Mbps duplex: full
    mac: e2:ba:fc:5e:ac:df
  IF-ID-4: fwpr108p0 state: up speed: 10000 Mbps duplex: full
    mac: c6:e5:9d:4d:ca:ff
  IF-ID-5: tap108i0 state: unknown speed: 10000 Mbps duplex: full
    mac: 5a:e8:02:59:e1:36
  IF-ID-6: veth105i0 state: up speed: 10000 Mbps duplex: full
    mac: fe:a3:e0:ef:06:f8
  IF-ID-7: veth106i0 state: up speed: 10000 Mbps duplex: full
    mac: fe:60:69:58:ac:1a
  IF-ID-8: veth107i0 state: up speed: 10000 Mbps duplex: full
    mac: fe:cc:9d:d8:d0:4e
  IF-ID-9: vmbr0 state: up speed: 10000 Mbps duplex: unknown
    mac: 50:9a:4c:4e:93:9d
RAID:
  Device-1: BigData type: zfs status: ONLINE level: mirror-0 raw: size: 1.81 TiB
    free: 1.75 TiB zfs-fs: size: 1.76 TiB free: 1.55 TiB
  Components: Online: 1: sdc 2: sdd
Drives:
  Local Storage: total: raw: 7.28 TiB usable: 5.4 TiB lvm-free: 16.38 GiB
    used: 21.77 GiB (0.4%)
  ID-1: /dev/sda vendor: Western Digital model: WD2003FYYS-18W0B0 size: 1.82 TiB
  ID-2: /dev/sdb vendor: Western Digital model: WD2003FYYS-18W0B0 size: 1.82 TiB
  ID-3: /dev/sdc vendor: Toshiba model: DT01ACA200 size: 1.82 TiB
  ID-4: /dev/sdd vendor: Hitachi model: HUA722020ALA331 size: 1.82 TiB
Partition:
  ID-1: / size: 93.93 GiB used: 12.38 GiB (13.2%) fs: ext4 dev: /dev/dm-1
    mapped: pve-root
  ID-2: /boot/efi size: 511 MiB used: 352 KiB (0.1%) fs: vfat dev: /dev/sda2
Swap:
  ID-1: swap-1 type: partition size: 45 GiB used: 12 KiB (0.0%) dev: /dev/dm-0
    mapped: pve-swap
Sensors:
  System Temperatures: cpu: 46.0 C mobo: N/A sodimm: 38.0 C gpu: nouveau
    temp: 57.0 C
  Fan Speeds (rpm): cpu: 991 gpu: nouveau fan: 2962
Info:
  Memory: total: 64 GiB available: 62.79 GiB used: 21.08 GiB (33.6%)
  Processes: 790 Uptime: 10d 15h 50m Init: systemd
  Packages: 1220 Compilers: gcc: 14.2.0 Shell: Bash v: 5.2.37 inxi: 3.3.38

此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。原文来自 — 版权归原作者所有。

推荐订阅源

Proxmox Support Forum