Ubuntu 22 安装 Kubernetes 1.29 集群指南

本文记录在 Ubuntu 22.04 系统上安装最新 Kubernetes 1.29 集群的完整过程，所有步骤均遵循官方文档操作规范

容器运行时安装

自 Kubernetes 1.20 版本起已弃用 Docker 支持，1.24 及后续版本完全移除了 Docker 依赖。容器运行时改用 containerd（符合 OCI 规范的标准容器实现）。虽然 Docker 已被弃用，但 containerd 仍由 Docker 公司维护，可通过 Docker 官方渠道安装最新版本。注意：如需安装特定版本 Kubernetes，建议从 GitHub 下载对应版本的 containerd。

# 安装基础依赖
apt-get update
apt-get install -y ca-certificates curl

# 配置Docker官方GPG密钥
install -m 0755 -d /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg -o /etc/apt/keyrings/docker.asc
chmod a+r /etc/apt/keyrings/docker.asc

# 添加Docker稳定版仓库
echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] \
https://download.docker.com/linux/ubuntu $(. /etc/os-release && echo "$VERSION_CODENAME") stable" | \
tee /etc/apt/sources.list.d/docker.list > /dev/null

# 安装containerd运行时
apt-get update
apt-get install -y containerd.io cri-tools

Kubernetes 核心组件安装

Kubernetes 集群需要以下三个核心组件：

kubeadm：集群引导工具，负责集群组件的部署和初始化
kubelet：节点代理服务，负责与控制平面通信并管理节点上的 Pod
kubectl：集群管理命令行工具，用于与 Kubernetes API 交互

# 安装基础依赖
apt-get update && apt-get install -y apt-transport-https

# 配置阿里云 Kubernetes 源
curl -fsSL https://mirrors.aliyun.com/kubernetes-new/core/stable/v1.29/deb/Release.key | \
    gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg
    
echo "deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] \
https://mirrors.aliyun.com/kubernetes-new/core/stable/v1.29/deb/ /" | \
tee /etc/apt/sources.list.d/kubernetes.list

# 安装 Kubernetes 组件
apt-get update
apt-get install -y --allow-downgrades kubelet kubeadm kubectl

验证安装结果

kubeadm version

kubeadm version: &version.Info{Major:"1", Minor:"28", GitVersion:"v1.28.7", GitCommit:"c8dcb00be9961ec36d141d2e4103f85f92bcf291", GitTreeState:"clean", BuildDate:"2024-02-14T10:39:01Z", GoVersion:"go1.21.7", Compiler:"gc", Platform:"linux/amd64"}

系统内核配置

禁用Swap分区

# 临时禁用swap
swapoff -a

# 永久禁用（注释fstab中的swap配置）
sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab

加载内核模块

# 创建模块配置文件
cat > /etc/modules-load.d/containerd.conf <<EOF
overlay
br_netfilter
EOF

# 立即加载内核模块
modprobe overlay
modprobe br_netfilter

网络参数配置

# 创建网络调优配置文件
cat > /etc/sysctl.d/kubernetes.conf <<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOF

# 应用配置
sysctl --system

安装Kubernetes集群

获取kubeadm 默认配置

kubeadm config print init-defaults > kubeadm.conf

修改4处地方

localAPIEndpoint.advertiseAddress为master的ip；
nodeRegistration.name 为当前节点名称；
imageRepository为国内源：registry.cn-hangzhou.aliyuncs.com/google_containerspodSubnet 设置pod网段，这里必须 192.168.0.0/16，因为下面安装CNI 插件Calico已经固定网段,如果要安装其他插件自行修改
kubernetesVersion: 1.29.2 ，查看了kubeadm 版本为1.29.2 ，默认是1.29.0

修改配置如下

apiVersion: kubeadm.k8s.io/v1beta3
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 172.28.14.94 #当前主机IP
  bindPort: 6443
nodeRegistration:
  criSocket: unix:///var/run/containerd/containerd.sock
  imagePullPolicy: IfNotPresent
  name: ser
  taints: null
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers #改成国内镜像地址
kind: ClusterConfiguration
kubernetesVersion: v1.29.2 # 改成跟kubelet 一致
networking:
  dnsDomain: cluster.local
  serviceSubnet: 10.96.0.0/12
  podSubnet: 192.168.0.0/16 #固定网段，这是cni插件Calico要求的
scheduler: {}

我这里先执行镜像下载，一步步来

kubeadm config images pull --config=kubeadm.conf

出现错误

kubeadm config images pull --config=kubeadm.conf 
W0323 23:12:47.468488 54593 initconfiguration.go:312\] error unmarshaling configuration schema.GroupVersionKind{Group:"kubeadm.k8s.io", Version:"v1beta3", Kind:"ClusterConfiguration"}: strict decoding error: unknown field "networking.pod-network-cidr" failed to pull image "registry.lank8s.cn/kube-apiserver:v1.29.0": output: time="2024-03-23T23:12:47+08:00" level=fatal msg="validate service connection: validate CRI v1 image API for endpoint "unix:///var/run/containerd/containerd.sock": rpc error: code = Unimplemented desc = unknown service runtime.v1.ImageService" , error: exit status 1 To see the stack trace of this error execute with --v=5 or higher

这是cri没有使用containerd 作为容器，在github 找到解决方法

新增下面内容

runtime-endpoint: unix:///var/run/containerd/containerd.sock 
image-endpoint: unix:///var/run/containerd/containerd.sock 
timeout: 2 
debug: true 
pull-image-on-create: false

Containerd 运行时配置

# 生成默认配置文件
mkdir -p /etc/containerd
containerd config default | tee /etc/containerd/config.toml >/dev/null

# 启用Systemd Cgroup驱动
sed -i 's/SystemdCgroup = false/SystemdCgroup = true/g' /etc/containerd/config.toml

# 配置镜像加速（阿里云镜像仓库）
sed -i '/\[plugins."io.containerd.grpc.v1.cri".registry.mirrors\]/a\        [plugins."io.containerd.grpc.v1.cri".registry.mirrors."docker.io"]\n          endpoint = ["https://docker.mirrors.ustc.edu.cn"]' /etc/containerd/config.toml

# 修改pause镜像地址
sed -i 's|sandbox_image = ".*"|sandbox_image = "registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.9"|g' /etc/containerd/config.toml

# 应用配置
systemctl restart containerd
systemctl enable containerd

配置验证：

ctr version && systemctl status containerd

配置containerd 容器仓库加速，不然使用默认docker.io 非常慢的新创建 /etc/containerd/certs.d/docker.io/ 目录, 向下面结构 docker.io 表示默认Docker 官方仓库地址

/etc/containerd/
├── certs.d
│   ├── docker.io
│   │   └── host.toml
└── config.toml

编辑host.toml

vim /etc/containerd/certs.d/docker.io/host.toml

添加下面内容

 [host."https://xxxxx.mirror.aliyuncs.com"] # docker 仓库加速地址
  capabilities = ["pull", "resolve","push"]
  skip_verify = true

其他配置可以参看Github 重启，让配置生效

systemctl restart containred

重新执行命令，拉取镜像，出现下面记录，表示拉取镜像成功

kubeadm config images pull --config=kubeadm.conf 
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.29.2 
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.29.2 
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.29.2 
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.29.2 
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.11.1 
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.9 
[config/images] Pulled registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.5.10-0

执行初始化命令

kubeadm init --config=kubeadm.yaml

看见下面信息，说明集群搭建成功

.... 省略

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

根据安装提示，执行下面命令

mkdir -p $HOME/.kube 
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config 
chown $(id -u):$(id -g) $HOME/.kube/config

执行下下面命令，验证下kubernets是否安装成功

如果你和我一样，状态不是Ready,那就是有问题

NAME STATUS ROLES AGE VERSION
master NotReady control-plane 5m14s v1.29.3

首先成kubelete 排查kubelet，查看是否正常运行

看见下面

3月 24 00:09:59 master kubelet[59351]: E0324 00:09:59.243528   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:04 master kubelet[59351]: E0324 00:10:04.244612   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:09 master kubelet[59351]: E0324 00:10:09.246425   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:14 master kubelet[59351]: E0324 00:10:14.248467   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:19 master kubelet[59351]: E0324 00:10:19.250277   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:24 master kubelet[59351]: E0324 00:10:24.251682   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:29 master kubelet[59351]: E0324 00:10:29.253199   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:34 master kubelet[59351]: E0324 00:10:34.255030   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:39 master kubelet[59351]: E0324 00:10:39.256634   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ>
3月 24 00:10:44 master kubelet[59351]: E0324 00:10:44.258525   59351 kubelet.go:2892] "Container runtime network not ready" networkReady="NetworkReady=false reason:NetworkPluginNotReady message:Networ

这是没有安装CNI 插件导致

部署Calico网络插件

# 直接从GitHub应用Calico部署清单
kubectl apply -f https://raw.githubusercontent.com/projectcalico/calico/v3.27.2/manifests/tigera-operator.yaml
kubectl apply -f https://raw.githubusercontent.com/projectcalico/calico/v3.27.2/manifests/custom-resources.yaml

# 实时监控部署进度（Ctrl+C退出监控）
kubectl get pods -n calico-system -w

当所有Pod状态变为Running即表示安装成功：

NAME                                       READY   STATUS    RESTARTS   AGE
calico-kube-controllers-5d6f6d4f7c-2hqzv   1/1     Running   0          2m
calico-node-8jrzf                          1/1     Running   0          2m
calico-typha-78f4459ccc-xgh4h              1/1     Running   0          2m

验证集群状态：

单节点集群需解除master节点调度限制：

kubectl taint nodes --all node-role.kubernetes.io/control-plane-

故障排查指南

检查kubelet服务状态：

systemctl status kubelet --no-pager -l

查看实时日志：

journalctl -u kubelet.service -f

容器日志查看（替换<pod_id>为实际容器ID）：

crictl logs <pod_id> --tail 50 -f

进入容器排查（替换<container_id>为实际容器ID）：

crictl exec -it <container_id> /bin/bash

更新日志

a0eef-Ubuntu 22安装Kubernetes 1.29于 2025/2/19

推荐订阅源

运维开发绿皮书