A round mounting flange consists of a circular flange body with a central plain through bore and an array of equally spaced bolt holes distributed on a bolt circle. The flange body is defined by outer_diameter and flange_thickness, with a coaxial through bore defined by bore_diameter. The bolt hole pattern is charact...

- outer_diameter = 107.156mm - flange_thickness = 21.034mm - bolt_circle_diameter = 87.312mm - bolt_hole_diameter = 9.922mm - number_bolt_holes = 4 - bore_diameter = 49.213mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=0603c53148

high-profile external-hex flange nut

A high-profile external-hex flange nut consists of a central plain through-hole, an external hex drive body, and an integrated circular flange at one end, forming a stepped nut profile. The plain through-hole is defined by through_hole_diameter and runs axially through the full nut height set by overall_height. The e...

- drive_style = external_hex - nut_profile = high - through_hole_diameter = 18.0 mm - overall_height = 27.0 mm - flange_diameter = 34.0 mm - flange_thickness = 5.0 mm - hub_width = 27.0 mm - hex_head_height = overall_height - flange_thickness = 27.0mm - 5.0mm = 22.0 mm # DIN 6331

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=067a9a8726

A spur gear consists of a toothed gear body, a central hub, and a round bore through the center. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, pitch_diameter, outer_diameter, root_diameter, face_width, addendum, dedendum, whole_depth, circular_pitch, base_diameter, and tooth_thickne...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 45 - pitch_diameter = 45 mm - outer_diameter = 47 mm - face_width = 6 mm - hub_diameter = 16 mm - hub_width = 6 mm - shaft_diameter = 8 mm - overall_width = 12 mm - addendum = gear_module = 1 = 1 mm # ISO 21771 / standard spur gear geometry - deden...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=08d2da3057

standard external-hex coupling nut

A standard external-hex coupling nut consists of an elongated hexagonal prismatic body with a plain cylindrical through hole running along the central axis. The hex body size and overall length are governed by hex_width_across_flats and overall_length. The axial clearance passage is defined by through_hole_diameter a...

- overall_length = 30mm - hex_width_across_flats = 17mm - through_hole_diameter = 10mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=0e9bcbd4f4

A five-tiered front step modeled as a single prismatic staircase solid. Substructures: (1) stair_profile_2d defined by number_of_steps, step_riser, step_depth, total_rise, total_run; (2) extrusion defined by step_width, extrusion_direction. Create a 2D side profile of 5 risers and 5 treads, then extrude the profile acr...

- **stair_profile_2d** - number_of_steps = 5 - step_riser = 170.0 mm - step_depth = 300.0 mm - total_rise = number_of_steps * step_riser = 850.0 mm - total_run = number_of_steps * step_depth = 1500.0 mm - profile_origin = (0.0 mm, 0.0 mm) - tread_direction = +X - rise_direction = +Z - **extrusion** - ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=0f27beedee

A round mounting flange consists of a circular flange body with a central plain through hole and a set of bolt holes arranged on a bolt circle. The flange body is defined by outer_diameter and flange_thickness, with the central through hole defined by inner_diameter. The bolt pattern consists of number_bolt_holes thr...

- inner_diameter = 34.925 mm - outer_diameter = 69.454 mm - flange_thickness = 13.097 mm - pitch_circle_diameter = 56.356 mm - bolt_hole_diameter = 6.747 mm - number_bolt_holes = 4

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=0fe9d9e3ce

A disc spring, also known as a Belleville washer, is a conical-shaped mechanical component that provides a spring force when subjected to a load. It typically consists of a circular ring with a conical profile, which allows it to compress and expand under load. Key parameters: outside_diameter and inner_diameter defin...

- outside_diameter=8.0mm - inner_diameter=4.2mm - overall_height=0.6mm - thickness=0.4mm - cone_height=0.2mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=14da78600e

A taper pin is a cylindrical pin with a slight taper along its length, typically used for positioning and securing components in mechanical assemblies. It usually has a small end and a large end, with a consistent taper angle. Key parameters for drawing a taper pin include the small_end_diameter, large_end_diameter, o...

- diameter=0.6mm (small-end diameter; the radius at the start of the taper section after the rounded tip) - length=4.0mm - rounded_end_height=0.08mm (axial length of the rounded section at each end) - taper_ratio=0.02 (1:50 standard taper, slope per unit axial length)

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=163672a65f

A water cup consists of a cup body and its interior is hollowed out to achieve a consistent thickness. A water cup is normally defined by cup_diameter, cup_height, cup_thickness, etc.

- cup_diameter=80.0mm, cup_height=120.0mm, cup_thickness=2.0mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=1b9f95801c

A spur gear consists of a cylindrical gear body with external involute teeth, a central hub, and a round bore for mounting on a shaft. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, base_diameter, root_diameter, addendum, dedendum, whole_de...

- pressure_angle = 20 degrees - gear_module = 1.5 mm - number_of_teeth = 80 - pitch_diameter = 120 mm - outer_diameter = 123 mm - face_width = 15 mm - hub_diameter = 55 mm - hub_width = 10 mm - shaft_diameter = 12 mm - overall_width = 25 mm - addendum = gear_module = 1.5 = 1.5 mm # ISO 54 / DIN 867 - dedendum = 1.25 *...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=1db55e40f2

A large washer, Grade A, typically consists of a flat, circular disc with a central hole. The washer is used to distribute the load of a threaded fastener, such as a screw or nut. Grade A indicates a specific standard of material and manufacturing quality. Key parameters for drawing a large washer include the outer_di...

- outer_diameter=9.0mm - inner_diameter=3.2mm - thickness=0.8mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=21d1517841

disc_spring_supporting_surface

A disc spring with bearing flats (supporting surfaces) consists of a conical disc with a central hole, where the inner edge of the upper face and the outer edge of the lower face are flattened into horizontal bearing surfaces that distribute the load evenly when the spring is compressed. Key parameters: outside_diamet...

- outside_diameter=8.0mm - inner_diameter=4.2mm - overall_height=0.6mm - thickness_with_bearing_flat=0.4mm - cone_height=0.2mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=264ab71adf

A gib head key is a type of machine key with a tapered end and a head that protrudes for easy removal. It is used to secure rotating elements like gears or pulleys to a shaft. A gib head key is typically defined by its length, width, height, taper_angle, and height_with_head the dimensions of the head. These parameter...

- length=14.0mm (axial length of the body, measured from the head/body joint to the tapered tip) - width=4.0mm (extrusion depth and total horizontal extent of the head) - key_height=4.0mm (body height at the head/body joint) - height_with_head=7.0mm (full height including the head) - taper_angle=45 degree (angle of the...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=28177ca409

A circular flange consists of a cylindrical flange body with a plain through bore and a bolt-hole pattern arranged on a bolt circle for fastening. The flange body is defined by outer_diameter and flange_thickness, with the central through bore defined by bore_diameter. The bolt-hole pattern is located on bolt_circle_...

- outer_diameter = 125.4125 mm - flange_thickness = 23.01875 mm - bore_diameter = 64.690625 mm - bolt_circle_diameter = 103.1875 mm - bolt_hole_diameter = 13.49375 mm - number_of_bolt_holes = 4

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=2c186f799d

A spur gear consists of a toothed gear body, a central hub, and a round bore through the center. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, pitch_diameter, outer_diameter, root_diameter, addendum, dedendum, whole_depth, circular_pitch, base_diameter, and face_width. The central ...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 18 - pitch_diameter = 18 mm - outer_diameter = 20 mm - face_width = 10 mm - hub_diameter = 14 mm - hub_width = 10 mm - shaft_diameter = 6 mm - overall_width = 20 mm - addendum = pitch_diameter / number_of_teeth = 18 mm / 18 = 1 mm # ISO 54 / DIN 86...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=2fcd25f3ac

A spur gear consists of a toothed gear body, a central hub, and a round bore aligned along the rotational axis. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, addendum, and dedendum. The central hub is integrated with the ge...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 48 - pitch_diameter = 48 mm - outer_diameter = 50 mm - face_width = 6 mm - hub_diameter = 16 mm - hub_width = 8 mm - shaft_diameter = 8 mm - overall_width = 14 mm - addendum = pitch_diameter / number_of_teeth = 48 mm / 48 = 1 mm # ISO 21771 - deden...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=333ba9d41c

A half moon key, also known as a Woodruff key, is a semi-circular, disk-shaped mechanical component used to connect a rotating element to a shaft. It typically fits into a corresponding keyway in the shaft and the rotating element, ensuring proper alignment and torque transmission. Key parameters for drawing a half mo...

- diameter=4.0mm - moon_height=1.4mm - key_thickness=1.0mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=33e0cf86f9

A square washer consists of a prismatic square plate (square outer profile) with a central circular through-hole. Main substructures and key parameter names: - Square plate body: washer_width, washer_thickness - Central hole (cut-through): washer_inner_hole_diameter

- **Square plate body** - washer_width = 40 mm - washer_thickness = 5 mm - **Central hole (cut-through)** - washer_inner_hole_diameter = 7.5 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=3582a53285

A spur gear consists of a toothed gear body, a central hub, and a round shaft bore. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, pitch_diameter, outer_diameter, root_diameter, addendum, dedendum, and face_width. The central hub is integrated with the gear body and is characterized...

- pressure_angle = 20 degrees - gear_module = 2 mm - number_of_teeth = 20 - pitch_diameter = 40 mm - outer_diameter = 44 mm - face_width = 20 mm - hub_diameter = 32 mm - hub_width = 10 mm - shaft_diameter = 10 mm - overall_width = 30 mm - addendum = pitch_diameter / number_of_teeth = 40 mm / 20 = 2 mm # ISO 6336 - ded...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=3ba87acac3

A round key is a cylindrical component used to connect a rotating machine element to a shaft, providing secure torque transmission. It fits into a corresponding keyway or slot, ensuring proper alignment and rotational stability between connected parts. Key parameters include the key’s diameter, height, and length. Th...

- diameter=5.0mm - height=3.0mm - length=10.0mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=3cebd4c4f6

A spur gear consists of a cylindrical gear body with external involute teeth, a central bore, and an integrated hub. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, base_diameter, addendum, dedendum, whole_depth, circular_pitc...

- pressure_angle = 20 degrees - gear_module = 2 mm - number_of_teeth = 24 - pitch_diameter = 48 mm - outer_diameter = 52 mm - face_width = 20 mm - hub_diameter = 38 mm - hub_width = 10 mm - shaft_diameter = 10 mm - overall_width = 30 mm - addendum = gear_module = 2 = 2 mm # ISO 21771 - dedendum = 1.25 * gear_module = ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=41b24257f7

A rectangular spline consists of a series of connected line segments forming a rectangular profile, commonly used in CAD designs to define paths, boundaries, or mechanical features such as gear teeth. This type of spline is characterized by its straight edges and precise geometry, making it ideal for applications requi...

- shaft_diameter=14.0mm - root_diameter=11.0mm - number_teeth=6 - tooth_width=3.0mm - spline_thickness=1.0mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=4ca1b8519a

A spur gear consists of a toothed gear body, a central hub section, and a round shaft bore. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, pitch_diameter, outer_diameter, root_diameter, addendum, dedendum, and face_width. The central hub is integrated with the gear body and is chara...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 40 - pitch_diameter = 40 mm - outer_diameter = 42 mm - face_width = 10 mm - hub_diameter = 35 mm - hub_width = 10 mm - shaft_diameter = 10 mm - overall_width = 20 mm - addendum = pitch_diameter / number_of_teeth = 40 mm / 40 = 1 mm # ISO 21771 - de...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=52e0552e1d

high-profile hex flange nut

A high-profile hex flange nut consists of a hexagonal hub integrated with a circular flange, with a plain through hole running axially through the full body. The plain through hole is defined by inner_diameter, and it is centered on the nut axis to provide the fastening clearance. The overall nut height is controlled...

- inner_diameter = 30.0 mm - overall_height = 45.0 mm - flange_diameter = 58.0 mm - flange_thickness = 8.0 mm - hub_width = 46.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=539c2a6856

A socket weld flange consists of flange body, bore, a recessed socket for the pipe insertion and welding, a raised face and bolt holes around the bolt circle to connect to another flange. A socket weld flange is normally defined by outer_circle_diameter, flange_thickness, total_height, bore_diameter, neck_diameter, nec...

- outer_circle_diameter=130mm, flange_thickness=17.5mm, total_height=22.0mm - bore_diameter=41mm - neck_diameter=65mm, neck_height=2.5mm - socket_diameter=49.5mm, socket_depth=16.0mm - raised_face_diameter=73mm, raised_face_thickness=2mm - bolt_circle_diameter=98.5mm, bolt_hole_diameter=16mm, number_bolt_holes=4

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=53b5d25579

A three-tiered front step modeled as a prismatic solid created from a 2D side-profile sketch (3 risers and 3 treads) extruded to a constant width. Substructures: step_profile (riser, depth, number_of_tiers), extrusion (width).

- **step_profile** - number_of_tiers = 3 - riser = 150.0 mm - depth = 300.0 mm - total_rise = number_of_tiers * riser = 450.0 mm - total_run = number_of_tiers * depth = 900.0 mm - profile_origin = (0.0, 0.0) mm - **extrusion** - width = 1200.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=553fe598d9

A spur gear consists of a toothed gear body, a central hub, and a round through bore aligned along the rotational axis. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, base_diameter, addendum, dedendum, whole_depth, circular_p...

- pressure_angle = 20 degrees - gear_module = 2 mm - number_of_teeth = 30 - pitch_diameter = 60 mm - outer_diameter = 64 mm - face_width = 20 mm - hub_diameter = 50 mm - hub_width = 10 mm - shaft_diameter = 10 mm - overall_width = 30 mm - addendum = pitch_diameter / number_of_teeth = 60 mm / 30 = 2 mm # ISO 21771 - de...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=5709ae4446

This shaft consists of two main sections: - The first section is an external spline with shaft_number_teeth, shaft_spline_module, shaft_spline_pitch_diameter, shaft_pressure_angle, and shaft_spline_height. - The second section is a smooth shaft with shaft_diameter and shaft_length, directly connected coaxially to the e...

- shaft_number_teeth = 15 - shaft_spline_module = 2 mm - shaft_spline_pitch_diameter = shaft_number_teeth * shaft_spline_module = 15*2 mm = 30 mm - shaft_pressure_angle = 30° - shaft_spline_height = 10 mm - shaft_diameter = 24 mm - shaft_length = 20 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=58a1b82005

A metric hex flange nut consists of a central plain through-hole passing through a combined hexagonal nut body and an integral circular flange at the base. The through-hole is defined by inner_diameter and runs the full axial length set by overall_height. The hexagonal nut body is characterized by hex_head_width_acro...

- inner_diameter = 8.0 mm - overall_height = 8.0 mm - flange_diameter = 17.9 mm - flange_thickness = 3.5 mm - hex_head_width_across_flats = 13.0 mm - hex_head_width_across_corners = hex_head_width_across_flats/cos(30) = 13.0mm/cos(30degrees) = 15.011106998930272 mm # ISO 4161 - hex_head_angle = 30.0 degrees # ISO 416...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=58fd45a90e

A round mounting flange consists of a circular flange body with a central through bore and an evenly spaced pattern of bolt holes arranged on a bolt circle. The flange body is defined by outer_diameter and flange_thickness. The central through bore is defined by inner_diameter and is concentric with the flange body. ...

- outer_diameter = 40.084mm - flange_thickness = 10.319mm - bolt_circle_diameter = 28.575mm - bolt_hole_diameter = 6.747mm - number_bolt_holes = 4 - inner_diameter = 14.288mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=5c47cdbfc1

A smooth shaft is a coaxial stepped cylindrical component designed to transmit torque and provide seating surfaces. It consists of six successive cylindrical sections along a common centerline. Each section is defined by its diameter and axial length: section_1_diameter/section_1_length through section_6_diameter/secti...

- **Section 1** - section_1_diameter = 10 mm - section_1_length = 40 mm - **Section 2** - section_2_diameter = 15 mm - section_2_length = 30 mm - **Section 3** - section_3_diameter = 20 mm - section_3_length = 40 mm - **Section 4** - section_4_diameter = 40 mm - section_4_length = 10 mm - **Section 5** ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=5c60c7a001

A smooth shaft is a stepped cylindrical component made by joining multiple coaxial shaft sections along a common center axis. It consists of sequential shaft_section_1 through shaft_section_11, each defined by its corresponding shaft_section_n_diameter and shaft_section_n_length, with each new section starting at the e...

- **shaft_section_1** - shaft_section_1_diameter = 10 mm - shaft_section_1_length = 20 mm - **shaft_section_2** - shaft_section_2_diameter = 15 mm - shaft_section_2_length = 30 mm - **shaft_section_3** - shaft_section_3_diameter = 20 mm - shaft_section_3_length = 40 mm - **shaft_section_4** - shaft_sectio...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=5c60c7a002

A smooth stepped shaft is a coaxial cylindrical component composed of five consecutive shaft sections used to transmit torque or provide mounting diameters. It consists of shaft_section_1 through shaft_section_5 arranged in series along the shaft axis, each defined by its diameter and length (shaft_section_#_diameter, ...

- **shaft_section_1** - shaft_section_1_diameter = 10 mm - shaft_section_1_length = 40 mm - **shaft_section_2** - shaft_section_2_diameter = 15 mm - shaft_section_2_length = 30 mm - **shaft_section_3** - shaft_section_3_diameter = 20 mm - shaft_section_3_length = 40 mm - **shaft_section_4** - shaft_sectio...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=5c60c7a003

A smooth stepped shaft is a rotational cylindrical component composed of nine coaxial shaft sections merged end-to-end along a common centerline. Each section is defined by its shaft_section_i_diameter and shaft_section_i_length (i = 1..9), creating a continuous stepped profile with smooth cylindrical surfaces and shar...

- **Shaft Section 1** - shaft_section_1_diameter = 10 mm - shaft_section_1_length = 20 mm - **Shaft Section 2** - shaft_section_2_diameter = 15 mm - shaft_section_2_length = 30 mm - **Shaft Section 3** - shaft_section_3_diameter = 20 mm - shaft_section_3_length = 40 mm - **Shaft Section 4** - shaft_sectio...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=5c60c7a004

A smooth stepped shaft composed of eight coaxial cylindrical sections (section_1 through section_8) revolved/extruded along a common center axis. Each section is defined by its section_i_diameter and section_i_length, stacked sequentially end-to-end to form a continuous smooth profile without threads or splines.

- **Section 1** - section_1_diameter = 10 mm - section_1_length = 20 mm - **Section 2** - section_2_diameter = 15 mm - section_2_length = 30 mm - **Section 3** - section_3_diameter = 20 mm - section_3_length = 40 mm - **Section 4** - section_4_diameter = 40 mm - section_4_length = 10 mm - **Section 5** ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=5c60c7a005

A spur gear with web consists of a spur gear body, a recessed hub machined from both faces leaving a central web, several web lightening (bolt) holes on a bolt circle, and a protruding hub with a central through hole for coupling. - Spur gear substructure is defined by number_gear_tooth, gear_module, gear_height, press...

- **Spur gear** - number_gear_tooth = 30 - gear_module = 2 mm - gear_height = 30 mm - pressure_angle = 20 degree - gear_pitch_diameter = number_gear_tooth * gear_module = 30 * 2 mm = 60 mm - **Recessed hub + web** - gear_recessed_hub_diameter = 50 mm - gear_recessed_hub_depth = 5 mm - gear_web_thickness...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=6417ae5005

external-hex coupling nut

An external-hex coupling nut consists of a prismatic hexagonal body with a coaxial plain through hole running the full length. The overall nut body is defined by overall_length and hex_width_across_flats, which set the axial length and the size of the hex profile. The internal bore is a straight through hole defined ...

- overall_length = 9.525 mm - hex_width_across_flats = 6.35 mm - through_hole_diameter = 2.8448 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=641cfcd541

A circular mounting flange consists of a cylindrical flange body with a central plain through bore and an evenly spaced bolt-hole pattern on a bolt circle. The flange body is defined by flange_outer_diameter and flange_thickness. The central through bore is defined by bore_diameter and is concentric with the flange b...

- flange_outer_diameter = 107.156mm - flange_thickness = 21.034mm - bolt_circle_diameter = 87.313mm - bore_diameter = 49.213mm - bolt_hole_diameter = 9.922mm - number_of_bolt_holes = 4

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=65bef2529b

A hex flange nut consists of a hexagonal nut body with an integral circular flange at one end and a plain through-hole along the central axis. The overall nut height is governed by overall_height. The hexagonal exterior profile is characterized by hub_width, which defines the across-flats size of the nut body. The in...

- overall_height = 16 mm - flange_diameter = 34.5 mm - flange_thickness = 7 mm - hub_width = 24 mm - inner_diameter = 16 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=669bfb187c

A spur gear stock consists of a cylindrical gear blank with external involute teeth distributed around its circumference, forming a long gear section along the axial direction. The toothed gear body is defined by number_of_teeth, pressure_angle, diametral_pitch, gear_module, pitch_diameter, and outer_diameter, which t...

- pressure_angle = 20 degrees - diametral_pitch = 16 - number_of_teeth = 24 - pitch_diameter = 38.1 mm - outer_diameter = 41.402 mm - overall_length = 304.8 mm - gear_module = 25.4mm / diametral_pitch = 25.4mm / 16 = 1.5875 mm # AGMA / ISO gear geometry

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=67b7983b2c

A spur gear consists of a toothed gear body, a central hub, and a round through bore aligned on the rotational axis. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, pitch_diameter, outer_diameter, root_diameter, base_diameter, circular_pitch, addendum, dedendum, whole_depth, and face_...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 60 - pitch_diameter = 60 mm - outer_diameter = 62 mm - face_width = 6 mm - hub_diameter = 18 mm - hub_width = 8 mm - shaft_diameter = 8 mm - overall_width = 14 mm - addendum = pitch_diameter / number_of_teeth = 60 mm / 60 = 1 mm # ISO 54 / DIN 867 ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=6d8fcf43ca

A spur gear stock consists of a cylindrical gear body with an external ring of involute teeth distributed around its circumference, forming a long gear blank along the axial direction. The toothed gear body is defined by number_of_teeth, pressure_angle, diametral_pitch, gear_module, pitch_diameter, outer_diameter, and...

- pressure_angle = 20 degrees - diametral_pitch = 12 - number_of_teeth = 24 - pitch_diameter = 2 in * 25.4 = 50.8 mm - outer_diameter = 2.17 in * 25.4 = 55.118 mm - overall_length = 1 ft * 12 in/ft * 25.4 = 304.8 mm - gear_module = 25.4 / diametral_pitch = 25.4 / 12 = 2.1166666667 mm # AGMA / inch DP to module convers...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=732e9c56ac

A slotted spring pin is a cylindrical fastener with a longitudinal slot along its length, allowing it to compress and expand to provide a spring-like effect when inserted into a hole. This design ensures secure retention and alignment in mechanical assemblies, absorbing shocks and vibrations. Key parameters include the...

- outer_diameter=1.3mm - inner_diameter=0.8mm - pin_length=4.0mm - chamfer_length=0.35mm - slot_angle=15deg

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=740b422c57

A spur gear stock consists of a cylindrical gear body with external involute gear teeth distributed around its circumference. The toothed gear body geometry is governed by number_of_teeth, pressure_angle, gear_module, diametral_pitch, pitch_diameter, and outer_diameter, which together define the pitch reference, tooth...

- pressure_angle = 20 degrees - diametral_pitch = 32 - number_of_teeth = 20 - pitch_diameter = 5/8 in = 15.875 mm - outer_diameter = 0.69 in = 17.526 mm - face_width = 1 ft = 304.8 mm - gear_module = 25.4 / diametral_pitch = 25.4 / 32 = 0.79375 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=7476ec86b6

A cylindrical pin is a small, precise component commonly used in mechanical assemblies for alignment, fastening, or locating purposes. Its simple cylindrical shape allows it to fit snugly into corresponding holes, ensuring accurate positioning of parts. Key parameters of the cylindrical pin include the pin diameter, wh...

- pin_diameter=1mm - chamfer_length=0.2mm - chamfer_angle=15 degree - length=3.0mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=77178c2112

washer for square-neck bolt

A washer for a square-neck bolt consists of a flat, circular disc (washer body) with a central square hole sized to fit the bolt's square neck. The CAD model is defined by the washer_diameter and washer_thickness for the disc, and the square_neck_hole_width for the central square cutout.

- **washer_body** - washer_diameter = 60.0 mm - washer_thickness = 10.0 mm - **square_neck_hole** - square_neck_hole_width = 20.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=7aa55dda29

high-profile hex flange nut

A high-profile hex flange nut consists of a hexagonal hub section integrated with a circular flange, and a plain through bore running axially through the entire part. The overall axial extent of the nut is governed by overall_height. The hexagonal outer profile of the hub is defined by hex_head_width_across_flats and ...

- overall_height = 9.0 mm - flange_diameter = 14.0 mm - flange_thickness = 3.0 mm - hub_width = 10.0 mm - bore_diameter = 6.0 mm - hex_head_width_across_flats = 10.0 mm # DIN 6331, table lookup - hex_head_width_across_corners = hex_head_width_across_flats/cos(30) = 10.0mm/cos(30deg) = 11.547005383792516 mm # ISO geom...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=7ba017c45b

high-profile hex flange nut

A high-profile hex flange nut consists of a hexagonal outer body with an integrated circular flange at one end and a plain cylindrical through hole running along the central axis. The overall form is tall relative to its footprint, with the flange providing a wider bearing surface at the base. The central through hole...

- inner_diameter = 24.0 mm - overall_height = 36.0 mm - flange_diameter = 45.0 mm - flange_thickness = 6.0 mm - hub_width = 36.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=7c683fcc0b

high-profile external-hex flange nut

A high-profile external-hex flange nut consists of a hexagonal nut body with a plain through-hole and an integrated circular flange at one end, forming a tall, robust fastener with an enlarged bearing surface. The overall nut form and profile are governed by nut_profile and overall_height, while the external driving g...

- nut_profile = high - drive_style = external_hex - through_hole_diameter = 20.0 mm - overall_height = 30.0 mm - flange_diameter = 37.0 mm - flange_thickness = 6.0 mm - hub_width = 30.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=7c8d69d649

A spur gear stock consists of a cylindrical gear body with external involute teeth distributed around the circumference, extending along an axial overall length. The toothed gear body is governed by number_of_teeth, pressure_angle, gear_module, and diametral_pitch, with the primary reference size captured by pitch_dia...

- pressure_angle = 20 degrees - diametral_pitch = 32 - number_of_teeth = 40 - pitch_diameter = 1.25 * 25.4 = 31.75 mm # AGMA 2001 / ISO 6336 - outer_diameter = 1.31 * 25.4 = 33.274 mm # AGMA 2001 / ISO 6336 - overall_length = 12 * 25.4 = 304.8 mm # AGMA 2001 / ISO 6336 - gear_module = 25.4 / diametral_pitch = 25.4 /...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=82c93fd5d6

A ball joint consists of a cylindrical shaft, a spherical ball, with an axial hole feature applied to the part. The shaft is defined by shaft_diameter and shaft_length, forming the main cylindrical stem. The ball is defined by ball_diameter and mounted at the center of the cylindrical shaft. The hole is characterize...

- shaft_diameter = 4.0 mm - shaft_length = 5.9 mm - ball_diameter = 5 mm - hole_diameter = 2.0 mm - hole_depth = 10.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=83ca2dab2e

An elbow flange consists of an elbow pipe, characterized by its curved shape, and two flanges, each equipped with bolt holes, located at both ends of the elbow pipe. An elbow flange is normally defined by flange_outer_diameter, elbow_flange_length, elbow_flange_height, elbow_angle, elbow_radius, elbow_pipe_diameter, el...

- flange_outer_diameter=200mm, elbow_flange_length=300mm, elbow_flange_height=300mm - elbow_angle = 90 degree, elbow_radius = 100mm - elbow_pipe_diameter=100mm, elbow_pipe_thickness=5mm - bolt_circle_radius=72.5mm, bolt_hole_diameter=16.0mm, number_bolt_holes=8

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=8450a6402b

A spur gear stock consists of a cylindrical gear blank with external involute gear teeth distributed around the outside diameter, forming a gear body of a defined axial length. The tooth geometry and sizing are governed by number_of_teeth, pressure_angle, diametral_pitch, and gear_module, which together establish the ...

- pressure_angle = 20 degrees - diametral_pitch = 16 - number_of_teeth = 20 - pitch_diameter = 31.75 mm - outer_diameter = 35.052 mm - overall_length = 304.8 mm - gear_module = 25.4mm / diametral_pitch = 25.4mm / 16 = 1.5875 mm # AGMA 2001 / ISO 6336

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=85145e0d4e

A lego brick consists of a lego brick body, studs on top of the lego brick and receiver tubes inside the brick. The studs are arranged in an MxN matrix, where M represents the number of rows and N represents the number of columns of studs. For example, a 2x4 lego indicates the presence of 2 rows and 4 columns of studs...

- lego_unit_size=8.0mm, lego_height=9.6mm, lego_thickness=1.6mm - num_studs_rows=2, num_studs_columns=4, studs_distance=8mm - stud_center=(4mm,4mm), stud_diameter=4.8mm, stud_height=1.6mm - tube_center=(8mm, 8mm), tube_outer_diameter=6.4mm, tube_inner_diameter=4.8mm, tube_distance=8mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=893b9137ff

A slip on flange consists of a flange body, bore, hub, a raised face and bolt holes around the bolt circle to connect to another flange. A slip on flange is normally defined by outer_circle_diameter, flange_thickness, total_height, bore_diameter, raised_face_diameter, raised_face_thickness, bolt_circle_diameter, bolt_h...

- outer_circle_diameter=108mm, flange_thickness=12.2mm, total_height=17.5mm - bore_diameter=34.5mm - hub_diameter=50.8mm - raised_face_diameter=49.3mm, raised_face_thickness=2.0mm - bolt_circle_diameter=79.2mm, bolt_hole_diameter=15.7mm, number_bolt_holes=4

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=8acfa92b7f

A flat washer, grade A, consists of a flat, circular disc with a central hole. It is typically used to distribute the load of a threaded fastener, such as a screw or nut, and is made to specific standards for material and dimensions. Key parameters for drawing a flat washer include the outer_diameter, inner_diameter (...

- outside_diameter=4.0mm - inner_diameter=1.7 - thickness=0.3mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=8ba92aba6e

A spur gear consists of a toothed gear body, a central hub, and a round through bore aligned on the rotational axis. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, pitch_diameter, outer_diameter, root_diameter, addendum, dedendum, and face_width. The central hub is integrated concen...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 50 - pitch_diameter = 50 mm - outer_diameter = 52 mm - face_width = 6 mm - hub_diameter = 16 mm - hub_width = 8 mm - shaft_diameter = 8 mm - overall_width = 14 mm - addendum = pitch_diameter / number_of_teeth = 50 mm / 50 = 1 mm # ISO 54 / standard...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=8dce996259

A spur gear consists of a cylindrical gear body with external teeth, an axial bore, and a rear hub. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, base_diameter, circular_pitch, tooth_thickness, addendum, dedendum, and whole_...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 80 - pitch_diameter = 80 mm - outer_diameter = 82 mm - face_width = 6 mm - hub_diameter = 18 mm - hub_width = 8 mm - shaft_diameter = 8 mm - overall_width = 14 mm - addendum = pitch_diameter / number_of_teeth = 80 mm / 80 = 1 mm # ISO 21771 - deden...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=9c9ce03e0f

A spur gear consists of a cylindrical gear body with external involute teeth, an integrated hub, and a central round bore. The toothed gear body is defined by gear_module, number_of_teeth, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, base_diameter, addendum, dedendum, whole_depth, circula...

- pressure_angle = 20 degrees - gear_module = 2 mm - number_of_teeth = 25 - pitch_diameter = 50 mm - outer_diameter = 54 mm - face_width = 20 mm - hub_diameter = 40 mm - hub_width = 10 mm - shaft_diameter = 10 mm - overall_width = 30 mm - addendum = gear_module = 2 = 2 mm # ISO 21771 - dedendum = 1.25 * gear_module = ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=aa79a250e3

A hex nut consists of an external hexagonal prism body (**nut_body**) and a central cylindrical inner hole (**through_hole**) cut through the full nut thickness. The nut is defined by across_flats, nut_thickness, and a through-hole defined by hole_diameter and hole_cut_depth (set to cut through the body). If no hex siz...

- **nut_body** - hole_diameter = 8 mm - nut_thickness = 10 mm - across_flats = 13 mm (default, proportional to hole_diameter) - across_corners = across_flats / cos(30 degree) = 13 mm / 0.8660254038 = 15.011 mm - **through_hole** - hole_diameter = 8 mm - hole_cut_depth = 30 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=aad4a0fbad

A spur gear stock consists of a cylindrical gear body with external involute teeth and a defined axial length. The toothed gear body is defined by number_of_teeth, pressure_angle, gear_module, pitch_diameter, and outer_diameter, which together govern the tooth spacing, tooth form, and the main reference diameters. Th...

- pressure_angle = 20 degrees - diametral_pitch = 16 - number_of_teeth = 12 - pitch_diameter = 0.75 in * 25.4 = 19.05 mm - outer_diameter = 0.88 in * 25.4 = 22.352 mm - overall_length = 1 ft * 12 in/ft * 25.4 = 304.8 mm - gear_module = 25.4 / diametral_pitch = 25.4 / 16 = 1.5875 mm # AGMA (inch DP to metric module con...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=ab46933317

A spur gear consists of a toothed gear body, a central hub section, and a round through bore aligned with the rotational axis. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, pitch_diameter, outer_diameter, root_diameter, addendum, dedendum, circular_pitch, base_diameter, and face_wid...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 22 - pitch_diameter = 22 mm - outer_diameter = 24 mm - face_width = 10 mm - hub_diameter = 18 mm - hub_width = 10 mm - shaft_diameter = 8 mm - overall_width = 20 mm - addendum = pitch_diameter / number_of_teeth = 22 mm / 22 = 1 mm # ISO 21771 - ded...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=ae6efafb3b

A spur gear stock consists of a cylindrical gear body with external involute teeth distributed around the outside, extruded along the gear axis to form the overall length. The tooth geometry and spacing are governed by number_of_teeth, diametral_pitch, gear_module, and pressure_angle, with the tooth form sized relativ...

- pressure_angle = 20 degrees - diametral_pitch = 20 - number_of_teeth = 16 - pitch_diameter = 0.8 in = 20.32 mm - outer_diameter = 0.9 in = 22.86 mm - overall_length = 1 ft = 304.8 mm - gear_module = 25.4 / diametral_pitch = 25.4 / 20 = 1.27 mm # AGMA / ISO gear geometry

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=aff93db55d

The smooth shaft is a cylindrical component with a uniform diameter and keyway features. The shaft is defined by its overall length and diameter, while the keyways are specified by width, depth, height, and the number of keyways. - Smooth shaft: diameter, length - Keyway: width, depth, height, number of keyways

- smooth_shaft_diameter = 50 mm - smooth_shaft_length = 80 mm - keyway_width = 5 mm - keyway_depth = 3 mm - keyway_height = 20 mm - num_keyway = 2

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=b0baf87576

A spur gear consists of a toothed gear body, a central hub, and a round bore through the center. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, addendum, dedendum, and whole_depth. The central hub is integrated with the gear...

- pressure_angle = 20 degrees - gear_module = 1.5 mm - number_of_teeth = 50 - pitch_diameter = 75 mm - outer_diameter = 78 mm - face_width = 15 mm - hub_diameter = 45 mm - hub_width = 10 mm - shaft_diameter = 10 mm - overall_width = 25 mm - addendum = gear_module = 1.5 = 1.5 mm # ISO 21771 / DIN 867 - dedendum = 1.25 ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=b2de850e9c

A disk brake consists of a circular disk and a central hub, used for friction-based braking. The key parameters defining the disk brake include disk_outer_diameter, disk_inner_diameter, and disk_thickness for the braking surface, and hub_outer_diameter, hub_inner_diameter, and hub_height for the hub. The disk also feat...

- **disk_outer_diameter** = 280 mm - **disk_inner_diameter** = 140 mm - **disk_thickness** = 30 mm - **hub_outer_diameter** = 160 mm - **hub_inner_diameter** = 60 mm - **hub_height** = 50 mm - **mounting_hole_diameter** = 15 mm - **mounting_hole_pcd** = 100 mm - **number_of_mounting_holes** = 5 - **cooling_hole_diame...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=b55517ee4b

A rear drive shaft consists of a cylindrical shaft and two end flanges with a bolt hole pattern for fastening to mating components. The shaft is constructed with shaft_length, outer_diameter, inner_diameter, and shaft_material_thickness to define its overall size and wall structure. Two end flanges with identical flan...

- shaft_length = 1000.0mm - outer_diameter = 50.0mm - inner_diameter = 40.0mm - flange_diameter = 100.0mm - flange_thickness = 20.0mm - bolt_hole_diameter = 10.0mm - bolt_hole_circle_diameter = 80.0mm - number_of_bolt_holes = 4 - shaft_material_thickness = 5.0mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=b849a4d94e

high-profile hex flange nut

A high-profile hex flange nut consists of a hexagonal hub integrated with a circular flange and a plain through hole running along the central axis, forming an overall tall nut profile. The overall nut height is governed by overall_height. The hexagonal hub is defined by hub_width, hex_width_across_flats, hex_width_ac...

- overall_height = 21.0 mm - flange_diameter = 28.0 mm - flange_thickness = 4.0 mm - hub_width = 22.0 mm - inner_diameter = 14.0 mm - hex_head_angle = 30.0 degrees # ISO 4032 / DIN 934 - hex_width_across_flats = hub_width = 22.0 mm # DIN 6331 - hex_width_across_corners = hex_width_across_flats/cos(30) = 22.0/cos(30) ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=bee61f8386

A standard hex flange nut consists of a hexagonal wrenching hub integrated with a circular flange at its base, with a coaxial through hole passing fully through the part. The overall form is a stacked flange-and-hex body with a continuous central bore. The overall height of the nut is governed by overall_height, with ...

- overall_height = 14.0 mm - flange_diameter = 29.9 mm - flange_thickness = 6.2 mm - hub_width = 21.0 mm - through_hole_diameter = 14.0 mm - hex_head_width_across_flats = hub_width = 21.0 mm # ISO 4161 / DIN 6923 - hex_head_width_across_corners = hex_head_width_across_flats/cos(30) = 21.0/cos(30) = 24.24871130596428 m...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=bf26b04486

slotted_headless_cylindrical_pin

A slotted headless cylindrical pin consists of a cylindrical body with a slot running along its length and no head. A slotted headless cylindrical pin is typically defined by its diameter, length, chamfer length, chamfer angle, slot width, and slot depth.

- pin_diameter=1mm - pin_length=2.5mm - chamfer_length=0.08mm - chamfer_angle=45 degree - slot_width=0.2mm - slot_depth=0.63mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=c4bad6c5af

A headless pin is a cylindrical rod without a head, commonly used for fastening or aligning components in mechanical assemblies. Key parameters include the pin’s diameter and length, which determine its size, and the chamfer length and angle, which facilitate insertion. These dimensions, along with material selection...

- pin_diameter=3mm - pin_length=6.0mm - chamfer_length=1.0mm - chamfer_angle=30 degree

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=c5551173e6

A round mounting flange consists of a circular flange body with a central plain through bore and an array of bolt holes distributed around a bolt circle for fastening. The flange body outer profile and thickness are governed by outer_diameter and flange_thickness. The central through bore is defined by bore_diameter. ...

- outer_diameter = 69.453mm - flange_thickness = 13.097mm - pitch_circle_diameter = 57.944mm - bolt_hole_diameter = 6.747mm - number_bolt_holes = 4 - bore_diameter = 34.925mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=c7364c0bbd

A 2 sections spur gear shaft consists of a spur gear mounted on a 2 section shaft. The shaft is constructed in 2 sections from bottom to top: The 1st section is a smooth cylindrical shaft defined by shaft_diameter and shaft_length. The spur gear is mounted on the 2nd section of shaft along the axial direction. The sp...

- **Shaft (section_1: smooth shaft)** - shaft_diameter = 16 mm - shaft_length = 30 mm - **Spur gear (section_2)** - gear_number_tooth = 20 - gear_module = 1 mm - gear_height = 20 mm - pressure_angle = 20 degree - gear_pitch_diameter = gear_number_tooth * gear_module = 20 * 1 mm = 20 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=c7ccc5660f

A dumbbell consisting of a central cylindrical handle and two identical hexagonal-prism end weights. The handle is defined by handle_length and handle_diameter. Each hex end is defined by cross_flat_width (distance across flats of the hex profile) and hex_height (axial thickness of the hex prism). The hex ends are coax...

- **handle (cylindrical rod)** - handle_length = 110.0 mm - handle_diameter = 28.0 mm - **hex_end_weights (2x hexagonal prism)** - cross_flat_width = 80.0 mm - hex_height = 30.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=cb6f0c2fb5

high-profile hex flange nut

A high-profile hex flange nut consists of a hexagonal nut body with an integral circular flange at its base, and a plain through hole running axially through the entire part. The through hole is defined by inner_diameter, and it is centered on the nut’s main axis to provide a clearance passage. The overall axial size...

- inner_diameter = 10.0 mm - overall_height = 15.0 mm - flange_diameter = 22.0 mm - flange_thickness = 4.0 mm - hex_nut_width_across_flats = 16.0 mm - hex_nut_width_across_corners = hex_nut_width_across_flats/cos(30) = 16.0mm/cos(30degrees) = 18.475208614068023 mm # DIN 6331 - hex_nut_half_angle = 30.0 degrees # DIN ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=cda06f9dbf

An external spline with fillet root tooth. Model as a cylindrical spline body with straight teeth distributed evenly around the axis, and apply a rounded fillet at the root of each tooth. In CAD, the tooth profile of a spline can be drawn using a series of simplified circular arcs. Key parameters include number_teeth,...

- number_teeth = 23 - spline_module = 3 mm - spline_pitch_diameter = number_teeth * spline_module = 23 * 3 mm = 69 mm - spline_height = 10 mm - pressure_angle = 30 degree - fillet_radius = 1.2 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=d733bfa285

A headed pin features a cylindrical shaft with a head at one end, typically larger in diameter than the shaft, which can be flat, rounded, or shaped according to its use. Key parameters include the pin diameter, pin length, head diameter, head thickness, chamfer length, and chamfer angle. These dimensions define the pi...

- pin_diameter=3mm - pin_length=6.0mm - head_diameter=5mm - head_thickness=1.0mm - chamfer_length=1.0mm - chamfer_angle=30 degree

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=d7e1bdf8be

A spur gear consists of a toothed cylindrical gear body, an integrated hub, and a central round bore. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, base_diameter, circular_pitch, addendum, dedendum, and whole_depth. The hub...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 24 - pitch_diameter = 24 mm - outer_diameter = 26 mm - face_width = 10 mm - hub_diameter = 20 mm - hub_width = 10 mm - shaft_diameter = 8 mm - overall_width = 20 mm - addendum = gear_module = 1 = 1 mm # ISO 54 / DIN 867 - dedendum = 1.25 * gear_mod...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=d831ec007c

A connecting rod consists of a flat plate with two circular heads connected by a straight shaft, and a through-hole at each head. The overall thickness of the rod is controlled by plate_thickness. The two heads are sized by head_outer_diameter and connected by a shaft whose width is set by shaft_width. The head-to-hea...

- plate_thickness = 3.0 mm - hole_center_distance = 29.0 mm - head_outer_diameter = 7.0 mm - hole_diameter = 3.0 mm - shaft_width = 3.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=da772a2e0b

A round mounting flange consists of a circular flange body with a central plain through bore and an array of equally spaced bolt holes on a bolt circle. The flange body is defined by outer_diameter and flange_thickness, with the central through bore defined by inner_diameter. The bolt hole pattern is located on the p...

- inner_diameter = 34.925mm - outer_diameter = 69.454mm - flange_thickness = 26.194mm - pitch_circle_diameter = 57.547mm - bolt_hole_diameter = 6.747mm - number_bolt_holes = 4

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=db1ef53f08

A wooden ladder consists of two parallel side rails and a set of equally spaced rungs connecting the rails. Each side rail is a rectangular prism defined by ladder_side_rails_length, ladder_side_rail_width (in-plane), and ladder_side_rail_thickness (out-of-plane). Each rung is a rectangular prism defined by ladder_rung...

- **Side rails (2x)** - ladder_side_rails_length = 2400 mm - ladder_side_rail_width = 40 mm - ladder_side_rail_thickness = 90 mm - side_rail_outer_to_outer_width = ladder_rung_length + 2 * ladder_side_rail_width = 400 mm + 2 * 40 mm = 480 mm - **Rungs (patterned)** - ladder_number_of_rungs = 7 - ladder_rung...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=db4e2a4bcf

A spur gear stock consists of a cylindrical gear body with external spur teeth running along the overall length. The tooth geometry is defined by number_of_teeth, pressure_angle, gear_module, and diametral_pitch, with the reference sizing governed by pitch_diameter and the tooth tip envelope governed by outer_diameter...

- pressure_angle = 20 degrees - diametral_pitch = 24 - number_of_teeth = 20 - pitch_diameter = 0.833 in = 21.1582 mm - outer_diameter = 0.92 in = 23.368 mm - overall_length = 1 ft = 304.8 mm - gear_module = 25.4 / diametral_pitch = 25.4 / 24 = 1.058333333 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=dbf8356a78

A rectangular drawer is defined as an open-top rectangular outer body (length, width, height) with a hollowed internal cavity created by shelling inwards by wall_thickness from the side walls and bottom (top remains open). The model is positioned by left_lower_front_corner.

- **outer_body** - length = 500.0 mm - width = 300.0 mm - height = 150.0 mm - left_lower_front_corner = (0.0, 0.0, 0.0) mm - **wall_shell_cavity** - wall_thickness = 20.0 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=dc935d877e

A spur gear stock consists of a cylindrical gear blank extended into a long stock body, with spur gear teeth formed around the outer circumference. The gear tooth geometry and reference sizing are governed by number_of_teeth, pressure_angle, diametral_pitch, gear_module, pitch_diameter, and outer_diameter. The stock ...

- pressure_angle = 20 degrees - diametral_pitch = 24 - number_of_teeth = 16 - pitch_diameter = 0.667 in = 16.9418 mm - outer_diameter = 0.75 in = 19.05 mm - overall_length = 1 ft = 304.8 mm - gear_module = 25.4 / diametral_pitch = 25.4 / 24 = 1.058333333 mm # AGMA, diametral pitch to module

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e0b89a1ecc

A spur gear consists of a toothed cylindrical gear body, a central hub, and a round bore through the axis. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, base_diameter, circular_pitch, addendum, dedendum, and whole_depth. Th...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 70 - pitch_diameter = 70 mm - outer_diameter = 72 mm - face_width = 6 mm - hub_diameter = 18 mm - hub_width = 8 mm - shaft_diameter = 8 mm - overall_width = 14 mm - addendum = gear_module = 1 = 1 mm # ISO 21771 - dedendum = 1.25 * gear_module = 1.2...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e20918a733

A spur gear consists of a toothed gear body, a central bore, and a hub integrated along the axial direction. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, pitch_diameter, outer_diameter, root_diameter, addendum, dedendum, whole_depth, circular_pitch, and face_width. The central bor...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 20 - pitch_diameter = 20 mm - outer_diameter = 22 mm - face_width = 10 mm - hub_diameter = 16 mm - hub_width = 10 mm - shaft_diameter = 6 mm - overall_width = 20 mm - addendum = gear_module = 1 = 1 mm # ISO 54 / standard metric spur gear proportion...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e4cf76d978

deep groove ball bearing inner ring

A deep groove ball bearing inner ring is a circular component that forms the inner raceway for the bearing balls. It is designed to support rotational motion and is defined by its bore, raceway geometry, and shoulder dimensions. The bore diameter defines the inner opening of the ring, which determines the shaft siz...

- bore_diameter=0.6mm - bearing_width=0.8mm - ball_diameter=0.38888888888889mm - raceway_depth_ratio=0.4 - shoulder_diameter=1.0666666666666675mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e50de66084

The smooth shaft is a cylindrical component with a uniform diameter and a keyway feature. The shaft is defined by its overall length and diameter, while the keyway is specified by its width, depth, height, and the number of keyways. - Smooth shaft: diameter, length - Keyway: width, depth, height, number of keyways

- smooth_shaft_diameter = 30 mm - smooth_shaft_length = 50 mm - keyway_width = 7 mm - keyway_depth = 4 mm - keyway_height = 20 mm - num_keyway = 1

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e74ef5c001

The smooth shaft is a cylindrical component with a uniform diameter and two keyway features. The shaft is defined by its overall length and diameter, while each keyway is specified by its width, depth, height, and the number of keyways. - Smooth shaft: diameter, length - Keyway: width, depth, height, number of keywa...

- smooth_shaft_diameter = 50 mm - smooth_shaft_length = 80 mm - keyway_width = 5 mm - keyway_depth = 5 mm - keyway_height = 20 mm - num_keyway = 2

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e74ef5c002

The smooth shaft is a cylindrical component with a uniform diameter and two keyway features. The shaft is defined by its overall length and diameter, while each keyway is specified by its width, depth, height, and the number of keyways. - Smooth shaft: smooth_shaft_diameter, smooth_shaft_length - Keyway: keyway_width,...

- smooth_shaft_diameter = 30 mm - smooth_shaft_length = 60 mm - keyway_width = 6 mm - keyway_depth = 3 mm - keyway_height = 30 mm - num_keyway = 2

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e74ef5c003

The smooth shaft is a cylindrical component with a uniform diameter and a keyway feature. The shaft is defined by its overall length and diameter, while the keyway is specified by its width, depth, height, and the number of keyways. - Smooth shaft: smooth_shaft_diameter, smooth_shaft_length - Keyway: keyway_width, key...

- smooth_shaft_diameter = 50 mm - smooth_shaft_length = 80 mm - keyway_width = 8 mm - keyway_depth = 4 mm - keyway_height = 50 mm - num_keyway = 1

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e74ef5c004

The smooth shaft is a cylindrical component with a uniform diameter and two keyway features. The shaft is defined by its overall length and diameter, while each keyway is specified by its width, depth, height, and the number of keyways. - Smooth shaft: diameter, length - Keyway: width, depth, height, number of keyways

- smooth_shaft_diameter = 50 mm - smooth_shaft_length = 80 mm - keyway_width = 8 mm - keyway_depth = 3 mm - keyway_height = 50 mm - num_keyway = 2

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=e74ef5c005

A smooth shaft is a stepped cylindrical component intended to transmit torque and provide bearing/fit journals. It consists of seven coaxial cylindrical sections arranged end-to-end along the shaft axis. Each section is defined by its section_N_diameter and section_N_length, where N = 1..7, forming the overall stepped ...

- **section_1** - section_1_diameter = 10 mm - section_1_length = 20 mm - **section_2** - section_2_diameter = 15 mm - section_2_length = 30 mm - **section_3** - section_3_diameter = 20 mm - section_3_length = 40 mm - **section_4** - section_4_diameter = 40 mm - section_4_length = 10 mm - **section_5** ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=ecdc59b900

A round mounting flange consists of a circular flange body with a central plain through bore and an array of equally spaced bolt holes arranged on a bolt circle. The flange body is defined by outer_diameter and flange_thickness. The central through hole is defined by bore_diameter. The bolt-hole pattern is defined by ...

- bore_diameter = 23.8125 mm - outer_diameter = 66.675 mm - flange_thickness = 13.49375 mm - bolt_circle_diameter = 53.18125 mm - bolt_hole_diameter = 6.746875 mm - number_bolt_holes = 4

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=eceefa2929

A round flange consists of a circular flange plate with a central plain through bore and a set of evenly spaced mounting holes arranged on a bolt circle. The main flange plate is defined by outer_diameter and flange_thickness. The central through bore is defined by bore_diameter and is concentric with the flange oute...

- outer_diameter = 125.4125 mm - flange_thickness = 23.01875 mm - bolt_circle_diameter = 103.1875 mm - mounting_hole_diameter = 13.49375 mm - number_of_mounting_holes = 4 - bore_diameter = 28.971875 mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=ecf3ef894f

A spur gear stock consists of a cylindrical gear body with an external involute-tooth ring running along the overall length, defined about a central axis. The tooth geometry and spacing are governed by number_of_teeth, pressure_angle, diametral_pitch, and gear_module, with the reference circle and outer envelope chara...

- pressure_angle = 20 degrees - diametral_pitch = 12 - number_of_teeth = 16 - pitch_diameter = 1.333 in = 33.8582 mm - outer_diameter = 1.5 in = 38.1 mm - overall_length = 1 ft = 304.8 mm - gear_module = 25.4 / diametral_pitch = 25.4 / 12 = 2.1166666667 mm # AGMA / ISO gear geometry - addendum = 1 / diametral_pitch = ...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=f0d323e9ce

A frustum is normally defined by top diameter, bottom diameter height, etc.

- top_diameter=15.0mm, bottom_diameter=25.0mm - height=30.00mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=f3e10795e7

A round mounting flange consists of a circular flange body with a central plain through hole and a set of equally spaced bolt holes arranged on a bolt circle. The flange body is defined by outer_diameter and flange_thickness. The central through hole is defined by inner_diameter and runs through the flange thickness....

- outer_diameter = 66.675mm - flange_thickness = 13.49375mm - pitch_circle_diameter = 53.18125mm - bolt_hole_diameter = 6.746875mm - number_bolt_holes = 4 - inner_diameter = 25.4mm

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=f67dad96d1

A spur gear consists of a toothed cylindrical gear body, a central hub region, and a round through bore aligned with the gear axis. The toothed gear body is defined by number_of_teeth, gear_module, pressure_angle, face_width, pitch_diameter, outer_diameter, root_diameter, base_diameter, circular_pitch, addendum, deden...

- pressure_angle = 20 degrees - gear_module = 1 mm - number_of_teeth = 32 - pitch_diameter = 32 mm - outer_diameter = 34 mm - face_width = 10 mm - hub_diameter = 26 mm - hub_width = 10 mm - shaft_diameter = 8 mm - overall_width = 20 mm - addendum = pitch_diameter / number_of_teeth = 32 mm / 32 = 1 mm # ISO 21771 - ded...

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=fa1a50cf2b

A spur gear stock consists of a cylindrical gear blank extruded along an axial length, with involute spur teeth distributed around the outer perimeter. The tooth geometry of the spur gear is governed by number_of_teeth, diametral_pitch, and pressure_angle, with the base pitch and involute profile derived from these pa...

- pressure_angle = 20 degrees - diametral_pitch = 24 - number_of_teeth = 12 - pitch_diameter = 1/2 in * 25.4 = 12.7 mm # AGMA 2001 / ISO 6336 - outer_diameter = 0.58 in * 25.4 = 14.732 mm # AGMA 2001 / ISO 6336 - overall_length = 1 ft * 12 in/ft * 25.4 = 304.8 mm # AGMA 2001 / ISO 6336

https://gnucleus-ai-cad-gen-freecad-viewer.static.hf.space/?id=fc1e98cd09