























Abstract:Explicit dynamic finite element (FE) simulations are widely used for large deformation engineering analysis, but repeated simulations remain costly during design space exploration and optimisation. In explicit FE analysis, nodal kinematics and element level deformation measures evolve through coupled node element updates. This motivates graph learned simulators that approximate one step FE state transitions and roll them out autoregressively. However, many mesh based graph surrogates are node centred, which makes element level variables and native nodal elemental exchange less direct to represent. This work proposes CAttBiGNN, a cross attention based bipartite graph neural network for coupled nodal elemental learning. The graph represents FE mesh nodes and elements as distinct entities linked by directed node element edges, enabling nodal displacement increments and element level deformation states to be predicted on their native discretisation domains. An edge aware cross attention processor uses geometric edge embeddings to modulate directional node element message passing. For larger graphs, CAttBiUGNN combines the bipartite processor with graph downsampling and upsampling to improve long-range information propagation. The method is evaluated on dome shaped cold forming and corner shaped hot forming benchmarks. Comparisons with node centred baselines and bipartite and attention ablations show improved accuracy and balance in nodal displacement and elemental thinning prediction during autoregressive rollout. The results indicate that the proposed finite element inspired learned simulator can support manufacturability oriented field prediction and efficient design space exploration in large deformation sheet material forming.
From: Nan Li [view email]
[v1]
Thu, 14 May 2026 17:12:44 UTC (8,108 KB)
[v2]
Tue, 16 Jun 2026 23:15:06 UTC (49,313 KB)
此内容由惯性聚合(RSS阅读器)自动聚合整理,仅供阅读参考。 原文来自 — 版权归原作者所有。