Abstract:Monopedal hopping robots are conceptually simple but highly dynamic and inherently unstable. Achieving robust 3D hopping is still difficult because ground reaction forces are available only during the short stance phase, while the robot is underactuated in flight. A key unresolved issue is how to improve flight-phase control authority. Propeller assistance provides a promising solution, but it requires careful coordination of leg-generated contact forces and propeller thrusts across stance and flight. This paper presents Pro-OMEGA2, a propeller-assisted 3D monopedal hopping robot with an active 3-RSR parallel leg and a trunk-mounted tri-rotor for auxiliary attitude regulation. To address the force coordination challenge, we propose a Hierarchical Force Allocation (HFA) framework based on a single rigid body (SRB) model. The leg generates the main stance contact wrench, while the tri-rotor provides auxiliary attitude regulation, compensating the residual attitude moment in stance and maintaining attitude during flight. Real-robot experiments in indoor and outdoor scenarios demonstrate sustained 3D hopping, including terrain transitions and impulsive push recovery, validating robustness under unmodeled contact and external disturbances.
From: Chuhan Zhang [view email]
[v1]
Sat, 6 Jun 2026 14:16:37 UTC (8,853 KB)
此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。 原文来自 — 版权归原作者所有。