Abstract:Soft lattice structures are increasingly used in robotics to tailor compliance and guide deformation; however, actuation is typically introduced at the device or module level, with actuators inserted into otherwise passive architectures. In this work, we move actuator-lattice co-design to the unit-cell scale. We present an embedded pneumatic unit cell that integrates curved-strut lattice geometry with a bidirectional bellow actuator within a single monolithic element. When tessellated, the lattice functions as a distributed actuation field in which global morphology is governed by spatial actuation patterns rather than uniform pressurization. Experimental characterization of 1x1, 2x2, and 3x3 tessellations demonstrates scalable displacement and force generation with repeatable cyclic performance. Selective actuation of unit cells in a 3x3x3 array produces distinct global deformation modes, including bending and directional grasping, without altering hardware configuration. Additionally, coupling active and passive unit cells enables bending-driven crawling locomotion, demonstrating that heterogeneous tessellations can translate through asymmetric deformation. These results establish unit-cell-level actuation as a strategy for distributed morphing in lattice-based soft robots and provide a foundation for scalable, monolithic robotic architectures.
From: Trevor Exley [view email]
[v1]
Wed, 17 Jun 2026 05:35:18 UTC (5,035 KB)
此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。 原文来自 — 版权归原作者所有。