Abstract:HVDC protection will be required in future multiterminal HVDC grids to prevent large outages caused by DC faults. Therefore, system-level protection design is essential for the development of HVDC switching stations that connect several converter stations and lines within these grids. This paper presents an optimization method for the design of HVDC circuit breaker (DCCB) configurations in HVDC switching stations and electrical energy hubs. This approach builds on the current practice of using selected configurations based on pre-defined protection strategies. In contrast to these existing methods, the DC switching station design in the proposed method offers significantly more flexibility and allows the consideration of large numbers of relevant operating conditions, leading to more effective, optimal design outcomes. A mixed-integer linear optimization problem is formulated to design the DC protection and minimize the risk of high impact DC faults. An example case study demonstrates that the optimization method allows the calculation of the optimal number of DCCBs for a given DC switching station, based on the failure rates of DC grid components and the DCCB cost relative to the fault impact. With these results, the marginal benefit to risk reduction of each additional DCCB included in a DC switching station is calculated. Moreover, the result of the optimization problem provides the optimal breaker configuration for the required number of DCCBs and can consequently be used as a topological design tool for DC switching stations.
From: Merijn Van Deyck [view email]
[v1]
Fri, 12 Jun 2026 09:10:52 UTC (312 KB)
此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。 原文来自 — 版权归原作者所有。