Abstract:In X-ray tomography, reconstruction quality generally improves with larger numbers of projections. However, more projections increase experiment costs, acquisition time and the radiation dose imparted to the sample. One mitigation to these trade-offs is to adopt a sequential design of experiments, in which each subsequent measurement is determined as a function of previously acquired data in order to maximize information gain. In practice, a widely used heuristic to maximize information is to align beams with the edges of the sample. A key challenge, however, is that the true sample is unknown, so identifying edge-aligned beams typically requires reconstructing the sample based on available measurements. This work proposes a novel sequential design method that identifies edge-aligned measurements directly from the sinogram, bypassing any reconstruction, thereby improving computational efficiency and reducing the experimental design's susceptibility to reconstruction errors. Our method dynamically selects the next set of measurement beams by maximizing an acquisition function that balances exploration and exploitation over the domain of all possible measurements, improving reconstruction quality while reducing measurement redundancy.
From: San Dinh [view email]
[v1]
Fri, 19 Jun 2026 19:58:27 UTC (1,175 KB)
此内容由惯性聚合(RSS阅读器)自动聚合整理，仅供阅读参考。 原文来自 — 版权归原作者所有。